source: palm/tags/release-3.4a/SCRIPTS/mbuild @ 1320

Last change on this file since 1320 was 116, checked in by raasch, 16 years ago

further preliminary updates concerning particle sorting and documentation

  • Property svn:keywords set to Rev
File size: 53.8 KB
Line 
1#!/bin/ksh
2# mbuild - Programmuebersetzungsscript
3# $Id: mbuild 54 2007-03-08 00:00:02Z raasch $
4
5     # Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
6     # auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
7     # Rechner
8
9     # Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
10     # verwendet wird:
11     # Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
12     # nach aussen weitergegeben. "while read line" funktioniert nicht
13     # innerhalb einer Pipe.
14
15     # letzte Aenderung:
16     # 06/05/02 - Siggi - Beginn der Entwicklung
17     # 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
18     # 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
19     # 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
20     #                    unter linux mehr noetig, da nun AT&T-Korn-Shell
21     #                    benutzt wird
22     # 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
23     # 19/12/02 - Siggi - ibmb validiert
24     # 05/02/03 - Siggi - hostname nobela included
25     # 04/03/03 - Siggi - host nech included
26     # 06/03/03 - Siggi - make_call_string is echoed without '' to
27     #                    file LAST_MAKE_CALL (otherwise error on NEC, because
28     #                    '' are part of compiler options
29     # 16/03/03 - Siggi - Two underscores are placed in front of every define
30     #                    string, in case that palm.f90 version contains
31     #                    such strings
32     # 16/04/03 - Siggi - First extensions for linux machines
33     # 24/06/03 - Siggi - host orkan included
34     # 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
35     # 24/07/03 - Siggi - host maestro admitted
36     # 06/08/03 - Siggi - host gregale admitted
37     # 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
38     # 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
39     # 08/01/04 - Siggi - additional preprocessor directive for ibm included
40     #                    (-D$OMP=OMP) in order to avoid problems with
41     #                    OMP_NUM_THREADS
42     # 09/01/04 - Siggi - action above cancelled
43     # 28/01/04 - Siggi - action above re-cancelled
44     # 08/03/04 - Siggi - host scirocco admitted
45     # 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
46     #                    the respective .f90 file is not listed in the makefile
47     #                    and deletion is demanded by the user
48     # 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
49     #                    due to error in ssh installation (otherwise a prompt
50     #                    for the password appears)
51     # 23/07/04 - Siggi - changes due to the new berni configuration
52     #                    (federation switch)
53     # 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
54     # 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
55     # 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
56     # 31/03/05 - Siggi - mbuild does not tar *.i files any more
57     # 24/04/05 - Siggi - netcdf support on lcmuk
58     # 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
59     # 12/05/05 - Siggi - netcdf support on ibm
60     #                    set OBJECT_MODE=64 for compiling on ibmb, ibmh
61     # 18/05/05 - Siggi - netcdf support on nec
62     # 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
63     # 23/05/05 - Siggi - netcdf support on ibms
64     # 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
65     # 30/06/05 - Siggi - netcdf support on bora
66     # 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
67     # 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
68     # 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
69     #                    host gfdl5 (ibmy) admitted
70     # 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
71     # 20/01/06 - Siggi - cpp directive for ibmy
72     # 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
73     # 10/02/06 - Siggi - modifications for scp on decalpha
74     # 13/04/06 - Siggi - ostria admitted
75     # 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
76     # 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
77     # 29/05/05 - Siggi - atmos (lcide) admitted
78     # 23/08/06 - Siggi - netcdf support for scirocco (notebook)
79     # 24/11/06 - Siggi - breva and levanto admitted
80     # 07/02/07 - Siggi - adapted for RIAM (neck)
81     # 10/02/07 - Siggi - all hpmuk-related code removed
82     # 02/03/07 - Siggi - compilation of utility programs and transfer of
83     #                    scripts to remote hosts added (option -u)
84     # 14/03/07 - Siggi - fimm admitted, revision number added to terminal
85     #                    output
86     # 16/03/07 - Siggi - adjustments (netcdf) for lctit
87     #                    adjustments for running under pdksh, local ip-addres
88     #                    is not determined any more
89     # 30/03/07 - Siggi - cpp-directives/options + netcdf-options are read
90     #                    from configuration file
91     #                    host identifier (local_host) is read from config file
92     # 10/10/07 - Siggi - bugfix: handling of comment lines
93
94
95
96    # VARIABLENVEREINBARUNGEN + DEFAULTWERTE
97 compile_utility_programs=false
98 config_file=.mrun.config
99 fimm=false
100 host=all
101 host_found=false
102 ibm_hb_done=false
103 lcmuk_done=false
104 locat=normal
105 makefile=""
106 remote_mode=interactive
107 scirocco=false
108 silent=false
109 suf=f90
110 update=false
111 working_directory=`pwd`
112
113 typeset -i  ih ihost=0
114
115 typeset  -R30 calltime
116 typeset  -L20 column1
117 typeset  -L50 column2
118 typeset  -L70 column3
119 typeset  -L40 version="MBUILD  2.0  Rev$Rev: 116 $"
120
121    # FEHLERBEHANDLUNG
122    # BEI EXIT:
123 trap 'rm -rf  $working_directory/tmp_mbuild
124       if [[ $locat != normal ]]
125       then
126          printf "\n\n +++ mbuild killed \n\n"
127       else
128          printf "\n\n *** mbuild finished \n\n"
129       fi' exit
130
131
132    # BEI TERMINAL-BREAK:
133 trap 'rm -rf  $working_directory/tmp_mbuild
134       printf "\n\n +++ mbuild killed by \"^C\" \n\n"
135       exit
136      ' 2
137
138
139
140    # SHELLSCRIPT-OPTIONEN EINLESEN
141 while  getopts  :c:h:m:rs:u  option
142 do
143   case  $option  in
144       (c)   config_file=$OPTARG;;
145       (h)   host=$OPTARG;;
146       (m)   makefile=$OPTARG;;
147       (r)   remote_mode=batch;;
148       (s)   suf=$OPTARG;;
149       (u)   compile_utility_programs=true;;
150       (\?)  printf "\n  +++ unknown option $OPTARG \n";
151             locat=parameter; exit;;
152   esac
153 done
154
155
156
157    # BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
158 if [[ $remote_mode = batch ]]
159 then
160    printf "\n  +++ sorry, batch mode does not work! \n"
161    locat=parameter; exit
162 fi
163
164
165
166    # PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
167 if [[ ! -f $config_file ]]
168 then
169    printf "\n  +++ configuration file: "
170    printf "\n           $config_file"
171    printf "\n      does not exist"
172    locat=configuration; exit 
173 fi
174
175
176
177    # LOKALEN RECHNER ERMITTELN
178 local_host_real_name=$(hostname)
179# local_addres=$(nslookup `hostname` 2>&1 | grep "Address:" | tail -1 | awk '{print $2}')
180
181
182
183    # HOST-IDENTIFIER (local_host) AUS KONFIGURATIONSDATEI BESTIMMEN
184 line=""
185 grep  "%host_identifier"  $config_file  >  tmp_mbuild
186 while read line
187 do
188    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
189    then
190       HOSTNAME=`echo $line | cut -d" " -s -f2`
191       host_identifier=`echo $line | cut -d" " -s -f3`
192       if [[ $local_host_real_name = $HOSTNAME ]]
193       then
194          local_host=$host_identifier
195          break
196       fi
197    fi
198 done < tmp_mbuild
199
200 if [[ "$local_host" = "" ]]
201 then
202    printf "\n  +++ no host identifier found in configuration file \"$config_file\""
203    printf "\n      for local host \"$local_host_real_name\"."
204    printf "\n      Please add line"
205    printf "\n      \"\%host_identifier $local_host_real_name <identifier>\""
206    printf "\n      to the configuration file."
207    locat=local_host; exit
208 fi
209
210
211
212 [[ $local_host_real_name = scirocco ]]  &&  scirocco=true
213 [[ $local_host_real_name = fimm.bccs.uib.no ]]  &&  fimm=true
214
215
216
217 if [[ $local_host != ibms ]]
218 then
219    config_file=$PWD/$config_file
220 else
221    config_file=`pwd`/$config_file
222 fi
223
224
225 
226    # BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
227 line=""
228 grep  " $local_host" $config_file | grep "%remote_username"  >  tmp_mbuild
229 while read line
230 do
231    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
232    then
233       local_username=`echo $line | cut -d" " -s -f2`
234    fi
235 done < tmp_mbuild
236
237
238 if [[ "$local_username" = "" ]]
239 then
240    printf "\n  +++ no user name found in configuration file"
241    printf "\n      for local host \"$local_host\" "
242    locat=config_file; exit
243 fi
244
245
246    # LOKALEN QUELLTEXTPFAD ERMITTELN.
247    # ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
248    # VEREINBART WURDE.
249    # DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
250    # VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
251 line=""
252 grep "%" $config_file  >  tmp_mbuild
253 while read line
254 do
255    if [[ "$line" != ""  &&  "$(echo $line | cut -d" " -s -f3)" = ""  &&  $(echo $line | cut -c1) != "#" ]]
256    then
257       var=`echo $line | cut -d" " -s -f1 | cut -c2-`
258       value=`echo $line | cut -d" " -s -f2`
259       eval export $var=\$value
260#       eval echo \"   $var=\$$var \"   # AUSGABE ZU TESTZWECKEN
261    fi
262 done < tmp_mbuild
263
264    # NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
265 line=""
266 grep "%source_path" $config_file  >  tmp_mbuild
267 while read line
268 do
269    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
270    then
271       if [[ "$(echo $line | cut -d" " -s -f3)" = "" ]]
272       then
273          global_source_path=`echo $line | cut -d" " -s -f2`
274       fi
275    fi
276 done < tmp_mbuild
277
278 line=""
279 grep  " $local_host" $config_file | grep "%source_path"  >  tmp_mbuild
280 while read line
281 do
282    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
283    then
284       local_source_path=`echo $line | cut -d" " -s -f2`
285    fi
286 done < tmp_mbuild
287
288 if [[ "$local_source_path" = "" ]]
289 then
290    if [[ "$global_source_path" != "" ]]
291    then
292       local_source_path=$global_source_path
293    else
294       printf "\n  +++ no source path found in configuration file"
295       printf "\n      for local host \"$local_host\" "
296       printf "\n      please set \"\%source_path\" in configuration file"
297       locat=config_file; exit
298    fi
299 fi
300 eval local_source_path=$local_source_path
301 eval local_source_path=$local_source_path
302
303
304     # EBENSO PFAD FUER DAS MAKE-DEPOSITORY ERMITTELN
305 line=""
306 grep "%depository_path" $config_file  >  tmp_mbuild
307 while read line
308 do
309    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
310    then
311       if [[ "$(echo $line | cut -d" " -s -f3)" = "" ]]
312       then
313          global_depository_path=`echo $line | cut -d" " -s -f2`
314       fi
315    fi
316 done < tmp_mbuild
317
318 line=""
319 grep  " $local_host" $config_file | grep "%depository_path"  >  tmp_mbuild
320 while read line
321 do
322    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
323    then
324       local_depository_path=`echo $line | cut -d" " -s -f2`
325    fi
326 done < tmp_mbuild
327
328 if [[ "$local_depository_path" = "" ]]
329 then
330    if [[ "$global_depository_path" != "" ]]
331    then
332       local_depository_path=$global_depository_path
333    else
334       printf "\n  +++ no depository path found in configuration file"
335       printf "\n      for local host \"$local_host\" "
336       printf "\n      please set \"\%depository_path\" in configuration file"
337       locat=config_file; exit
338    fi
339 fi
340 eval local_depository_path=$local_depository_path
341 eval local_depository_path=$local_depository_path
342
343
344
345    # PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
346    # VEREINBART WURDE
347 if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
348 then
349    printf "\n  +++ no main program or more than one main program defined"
350    printf "\n      in configuration file"
351    locat=configuration; exit
352 else
353    line=`grep "%mainprog" $config_file`
354    if [[ "$line" = ""  ||  $(echo $line | cut -c1) = "#" ]]
355    then
356       printf "\n  +++ no main program defined in configuration file"
357       locat=configuration; exit
358    fi
359    mainprog=`echo $line | cut -d" " -s -f2 | cut -d"." -f1`
360 fi
361
362
363
364    # MAKEFILE vorhanden
365 [[ "$makefile" = "" ]]  &&  makefile=$local_source_path/Makefile
366 if [[ ! -f $makefile ]]
367 then
368    printf "\n  +++ makefile: "
369    printf "\n           $makefile"
370    printf "\n      does not exist"
371    locat=makefile; exit 
372 fi
373
374
375    # HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
376 calltime=$(date)
377 printf "\n"
378 printf "#------------------------------------------------------------------------# \n"
379 printf "| $version$calltime | \n"
380 printf "|                                                                        | \n"
381 column1="called on:"; column2=$local_host_real_name
382 printf "| $column1$column2 | \n"
383 column1="local username:"; column2=$local_username
384 printf "| $column1$column2 | \n"
385 column1="local IP-addres:"; column2=$local_addres
386 printf "| $column1$column2 | \n"
387 column1="config file:"; column2=$config_file
388 printf "| $column1$column2 | \n"
389 column1="makefile:"; column2=$makefile
390 printf "| $column1$column2 | \n"
391 column1="local source path:"; column2=$local_source_path
392 printf "| $column1$column2 | \n"
393 column1="make depository:"; column2=$local_depository_path
394 printf "| $column1$column2 | \n"
395 printf "#------------------------------------------------------------------------# \n"
396
397# printf "|                                                                        | \n"
398
399
400 if [[ $compile_utility_programs = false ]]
401 then
402
403    cd  $local_source_path
404
405
406       # LISTE DER ZU PRUEFENDEN QUELLTEXTDATEIEN ERSTELLEN
407    source_code_files=`ls -1  *.$suf`
408
409
410
411       # VERZEICHNIS FUER DAS MAKE-DEPOSITORY ERZEUGEN,
412       # FALLS NOCH NICHT VORHANDEN. ANSONSTEN ALLE DATEIEN
413       # NEUEREN DATUMS IN DIESES VERZEICHNIS KOPIEREN
414    if [[ ! -d $local_depository_path ]]
415    then
416       if  mkdir $local_depository_path
417       then
418          printf "\n\n  *** directory for make depository:"
419          printf "\n           $local_depository_path"
420          printf "\n      was created\n"
421
422             # MAKEFILE UND QUELLTEXTDATEIEN UNTER BEIBEHALTUNG
423             # IHRES DATUMS INS VERZEICHNIS KOPIEREN
424          printf "\n  *** makefile and source code files are copied to"
425          printf "\n      $local_depository_path\n"
426          printf "\n      copying makefile \"$makefile\" ..."
427          cp -p  $makefile  $local_depository_path/Makefile
428
429             # QUELLTEXTDATEIEN MUESSEN IM MAKEFILE AUFGEFUEHRT
430             # SEIN
431          for  filename  in  $source_code_files
432          do
433             if [[ $(grep -c $filename  $makefile) = 0 ]]
434             then
435                printf "\n  +++ source code file:"
436                printf "\n         $filename"
437                printf "\n      is not listed in makefile"
438                locat=makefile; exit
439             else
440                printf "\n      copying source code file \"$filename\" ..."
441                cp -p  $filename  $local_depository_path
442             fi
443          done
444          printf "\n"
445       else
446          printf "\n  +++ directory for make depository:"
447          printf "\n           $local_depository_path"
448          printf "\n      cannot be created"
449          locat=local_depository_path; exit
450       fi
451    else
452 
453       printf "\n  *** checking file status ..."
454
455          # MAKEFILE KOPIEREN, FALLS NEUEREN DATUMS
456       if [[ $makefile -nt $local_depository_path/Makefile ]]
457       then
458          printf "\n  *** update of \"$makefile\" "
459          cp -f -p  $makefile  $local_depository_path/Makefile
460          update=true
461
462             # PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY AUCH IM NEUEN MAKEFILE
463             # VERZEICHNET SIND UND GEGEBENENFALLS DATEIEN LOESCHEN
464          cd  $local_depository_path
465          source_code_files_in_depository=`ls -1  *.$suf`
466          for  filename  in  $source_code_files_in_depository
467          do
468             if [[ $(grep -c $filename  Makefile) = 0 ]]
469             then
470                printf "\n  *** source code file in \"$local_depository_path\":"
471                printf "\n         $filename"
472                printf "\n      is not listed in makefile"
473                if [[ $silent = false ]]
474                then
475                   answer=dummy
476                   printf "\n\n"
477                   while [[ "$answer" != y  &&  "$answer" != Y  &&  "$answer" != n  &&  "$answer" != N ]]
478                   do
479                      printf " >>> delete \"$filename\" in \"$local_depository_path\" (y/n) ?  "
480                      read  answer
481                   done
482                   if [[ $answer = y  ||  $answer = Y ]]
483                   then
484                      base=`echo $filename | cut -d. -f2`
485                      rm -f  $filename
486                      rm -f  ${base}.o  ${base}.mod
487                      printf "\n  *** \"$filename\" deleted in \"$local_depository_path\" "
488                   else
489                      printf "\n  *** \"$filename\" not deleted in \"$local_depository_path\" "
490                   fi
491                fi
492             fi
493          done
494          cd  -  > /dev/null  2>&1
495
496       elif [[ $local_depository_path/Makefile -nt $makefile ]]
497       then
498          printf "\n  *** makefile in depository is newer than"
499          printf "\n      \"$makefile\" "
500          if [[ $silent = false ]]
501          then
502             answer=dummy
503             printf "\n\n"
504             while [[ "$answer" != y  &&  "$answer" != Y  &&  "$answer" != n  &&  "$answer" != N ]]
505             do
506                printf " >>> update \"$makefile\" (y/n) ?  "
507                read  answer
508             done
509             if [[ $answer = y  ||  $answer = Y ]]
510             then
511                cp -f -p  $local_depository_path/Makefile  $makefile
512                printf "\n  *** \"$makefile\" updated"
513             else
514                printf "\n  *** \"$makefile\" not updated"
515             fi
516          fi
517       fi
518
519          # QUELLTEXTDATEIEN KOPIEREN, FALLS NEUEREN DATUMS
520          # SIE MUESSEN IM MAKEFILE AUFGEFUEHRT SEIN
521       for  filename  in  $source_code_files
522       do
523          if [[ $(grep -c $filename  $makefile) = 0 ]]
524          then
525             printf "\n  +++ source code file:"
526             printf "\n         $filename"
527             printf "\n      is not listed in makefile"
528             locat=makefile; exit
529          else
530             if [[ ! -f $local_depository_path/$filename ]]
531             then
532                cp -p  $filename  $local_depository_path
533                printf "\n  *** source code file \"$filename\" created in \"$local_depository_path\" "
534             fi
535             if [[ $filename -nt $local_depository_path/$filename ]]
536             then
537                printf "\n  *** update of source code file \"$filename\" "
538                cp -f -p  $filename  $local_depository_path
539                update=true
540             fi
541          fi
542       done
543
544
545          # PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY IM AKTUELLEN ARBEITSVERZEICHNIS VORHANDEN
546          # ODER EVTL. NEUEREN DATUMS SIND
547       cd  $local_depository_path
548       source_code_files_in_depository=`ls -1  *.$suf`
549       cd  -  > /dev/null  2>&1
550       for  filename  in  $source_code_files_in_depository
551       do
552          if [[ ! -f $filename ]]
553          then
554             printf "\n  *** source code file \"$filename\" does not exist in current directory"
555             if [[ $silent = false ]]
556             then
557                answer=dummy
558                printf "\n\n"
559                while [[ "$answer" != y  &&  "$answer" != Y  &&  "$answer" != n  &&  "$answer" != N ]]
560                do
561                   printf " >>> create \"$filename\" in current directory (y/n) ?  "
562                   read  answer
563                done
564                if [[ $answer = y  ||  $answer = Y ]]
565                then
566                   cp -p  $local_depository_path/$filename  $filename
567                   printf "\n  *** source code file \"$filename\" created in current directory"
568                else
569                   printf "\n  *** source code file \"$filename\" not created in current directory"
570                fi
571             fi
572          elif [[ $local_depository_path/$filename -nt $filename ]]
573          then
574             ls -al $local_depository_path/$filename
575             ls -al $filename
576             printf "\n  *** source code file \"$filename\" in depository is newer than in current directory"
577             if [[ $silent = false ]]
578             then
579                answer=dummy
580                printf "\n\n"
581                while [[ "$answer" != y  &&  "$answer" != Y  &&  "$answer" != n  &&  "$answer" != N ]]
582                do
583                   printf " >>> update \"$filename\" in current directory (y/n) ?  "
584                   read  answer
585                done
586                if [[ $answer = y  ||  $answer = Y ]]
587                then
588                   cp -f -p  $local_depository_path/$filename  $filename
589                   printf "\n  *** source code file \"$filename\" updated in current directory"
590                else
591                   printf "\n  *** source code file \"$filename\" not updated in current directory"
592                fi
593             fi
594          fi
595       done
596
597       if [[ $update = false ]]
598       then
599          printf "\n  *** no updates necessary in \"$local_depository_path\" "
600          if [[ $silent = false ]]
601          then
602             answer=dummy
603             printf "\n\n"
604             while [[ "$answer" != y  &&  "$answer" != Y  &&  "$answer" != n  &&  "$answer" != N ]]
605             do
606                printf " >>> continue with updates on remote hosts (y/n) ?  "
607                read  answer
608             done
609             if [[ $answer = n  ||  $answer = N ]]
610             then
611                locat=user_abort; exit
612             fi
613          fi
614       fi
615    fi
616 
617
618 
619       # QUELLTEXTDATEIEN UND MAKEFILE MIT TAR ZUSAMMENBINDEN
620       # IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
621       # DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
622    printf "\n\n  *** tar of makefile and source files in depository ..." 
623    cd  $local_depository_path
624    chmod u+w  Makefile  *.$suf
625    tar -cf  ${mainprog}_sources.tar  Makefile  *.$suf
626    printf "\n"
627
628 fi
629
630
631
632    # BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
633 if [[ $host = all ]]
634 then
635    printf "\n  *** updates will be made for ALL hosts found in"
636    printf "\n      the configuration file"
637 else
638    printf "\n  *** update will be made for host \"$host\" "
639 fi
640
641 if [[ $silent = false ]]
642 then
643    answer=dummy
644    printf "\n\n"
645    while [[ "$answer" != y  &&  "$answer" != Y  &&  "$answer" != n  &&  "$answer" != N ]]
646    do
647       printf " >>> continue (y/n) ?  "
648       read  answer
649    done
650    if [[ $answer = n  ||  $answer = N ]]
651    then
652       locat=user_abort; exit
653    fi
654 fi
655 
656 
657
658   
659    # GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
660    # VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
661 printf "\n  *** scanning configuration file for host(s) ..."
662
663 grep  %fopts  $config_file  >  tmp_mbuild
664 while read line
665 do
666       # KOMMENTARZEILEN UEBERSPRINGEN
667    [[ $(echo $line | cut -c1) = "#" ]]  &&  continue
668    (( ihost = ihost + 1 ))
669    hostline[$ihost]="$line"
670 done < tmp_mbuild
671
672 
673 while (( ih < ihost ))
674 do
675
676    (( ih = ih + 1 ))
677
678       # REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
679       # NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
680       # SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
681    remote_host_string=`echo ${hostline[$ih]} | cut -d" " -s -f3-`
682    remote_host=`echo $remote_host_string | cut -d" " -f1`
683    if [[ $host != all ]]
684    then
685       [[ $remote_host != $host ]]  &&  continue
686    fi
687    host_found=true
688    condition1=`echo $remote_host_string | cut -d" " -s -f2`
689    if [[ $condition1 = $remote_host ]]
690    then
691       condition1=""
692    else
693       condition2=`echo $remote_host_string | cut -d" " -s -f3`
694    fi
695
696    netcdf_inc=""
697    netcdf_lib=""
698
699       # AUF HLRN-RECHNER NUR EINMAL UEBERSETZEN
700    if [[ $remote_host = ibmb  ||  $remote_host = ibmh ]]
701    then
702       if [[ $ibm_hb_done = true ]]
703       then
704          printf "\n *** remote host \"$remote_host\" skipped since compilation has already"
705          printf "\n     been carried out on one of the HLRN machines\n"
706          continue
707       fi
708    fi
709
710       # AUF LCMUK-RECHNER NUR EINMAL UEBERSETZEN
711    if [[ $remote_host = lcmuk ]]
712    then
713       if [[ $lcmuk_done = true ]]
714       then
715          printf "\n *** local host \"$remote_host\" skipped since compilation has already"
716          printf "\n     been carried out on this host\n"
717          continue
718       fi
719    fi
720
721
722       # IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
723    case  $remote_host  in
724        (lcmuk)          remote_addres=130.75.105.2;;
725        (lctit)          remote_addres=172.17.75.161;;
726        (decalpha)       remote_addres=165.132.26.56;;
727        (ibmb)           remote_addres=130.73.230.10;;
728        (ibmh)           remote_addres=130.75.4.10;;
729        (ibms)           remote_addres=150.183.5.101;;
730        (ibmy)           remote_addres=165.132.26.58;;
731        (nech)           remote_addres=136.172.44.192;;
732        (neck)           remote_addres=133.5.178.11;;
733        (ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
734        (*)              if [[ $local_host != $remote_host ]]
735                         then
736                            printf "\n  +++ remote host \"$remote_host\" unknown";
737                            printf "\n      please inform S. Raasch!"
738                         fi;;
739    esac
740
741
742       # REMOTE-USERNAMEN ERMITTELN
743    line=""
744    found=false
745    grep  "$remote_host_string" $config_file | grep "%remote_username"  >  tmp_mbuild
746    while read line1
747    do
748
749       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
750       then
751          line="$line1"
752       fi
753
754       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
755       then
756          remote_username=`echo $line | cut -d" " -s -f2`
757          found=true
758       fi
759
760    done < tmp_mbuild
761
762    if [[ $found = false ]]
763    then
764       printf "\n  +++ no remote username found in configuration file"
765       printf "\n      for \"$remote_host_string\" "
766       locat=config_file; exit
767    fi
768
769
770       # REMOTE-QUELLTEXTPFAD ERMITTELN
771    line=""
772    remote_source_path=""
773    grep  "$remote_host_string" $config_file | grep "%source_path"  >  tmp_mbuild
774    while read line1
775    do
776
777       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
778       then
779          line="$line1"
780       fi
781
782       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
783       then
784          remote_source_path=`echo $line | cut -d" " -s -f2`
785       fi
786
787    done < tmp_mbuild
788
789    if [[ "$remote_source_path" = "" ]]
790    then
791       if [[ "$global_source_path" != "" ]]
792       then
793          remote_source_path=$global_source_path
794       else
795          printf "\n  +++ no source path found in configuration file"
796          printf "\n      for \"$remote_host_string\" "
797          locat=config_file; exit
798       fi
799    fi
800
801    remote_ud=${remote_source_path}/../UTIL
802    remote_ud=$(eval echo $remote_ud)
803
804
805       # REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
806    remote_md=""
807    line=""
808    grep  "$remote_host_string" $config_file | grep "%depository_path"  >  tmp_mbuild
809    while read line1
810    do
811
812       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
813       then
814          line="$line1"
815       fi
816
817       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
818       then
819          remote_md=`echo $line | cut -d" " -s -f2`
820       fi
821
822    done < tmp_mbuild
823
824    if [[ "$remote_md" = "" ]]
825    then
826       if [[ "$global_depository_path" != "" ]]
827       then
828          remote_md=$global_depository_path
829       else
830          printf "\n  +++ no depository path found in configuration file"
831          printf "\n      for \"$remote_host_string\" "
832          printf "\n      please set \"\%depository_path\" in configuration file"
833          locat=config_file; exit
834       fi
835    fi
836
837    remote_md=$(eval echo $remote_md)
838
839
840       # COMPILERNAMEN ERMITTELN
841    line=""
842    found=false
843    grep  "$remote_host_string" $config_file | grep "%compiler_name "  >  tmp_mbuild
844    while read line1
845    do
846
847       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
848       then
849          line="$line1"
850       fi
851
852       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
853       then
854          compiler_name=`echo $line | cut -d" " -s -f2`
855          found=true
856       fi
857
858    done < tmp_mbuild
859
860    if [[ $found = false ]]
861    then
862       printf "\n  +++ no compiler name found in configuration file"
863       printf "\n      for \"$remote_host_string\" "
864       locat=config_file; exit
865    fi
866
867
868       # BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
869       # SERIELLER COMPILERNAME ERMITTELT WERDEN
870    if [[ $(echo $remote_host_string | grep -c parallel) = 1 ]]
871    then
872       line=""
873       found=false
874       grep  "$remote_host_string" $config_file | grep "%compiler_name_ser"  >  tmp_mbuild
875       while read line1
876       do
877
878          if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
879          then
880             line="$line1"
881          fi
882
883          if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
884          then
885             compiler_name_ser=`echo $line | cut -d" " -s -f2`
886             found=true
887          fi
888
889       done < tmp_mbuild
890
891       if [[ $found = false ]]
892       then
893          printf "\n  +++ no serial compiler name found in configuration file"
894          printf "\n      for \"$remote_host_string\" "
895          locat=config_file; exit
896       fi
897    else
898       compiler_name_ser=$compiler_name
899    fi
900
901
902
903       # PRAEPROZESSOR-OPTIONEN/DIREKTIVEN ERMITTELN
904    line=""
905    found=false
906    grep  "$remote_host_string" $config_file | grep "%cpp_options"  >  tmp_mbuild
907    while read line1
908    do
909
910       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
911       then
912          line="$line1"
913       fi
914
915       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
916       then
917             # EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
918          cpp_options=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
919          found=true
920       fi
921
922    done < tmp_mbuild
923
924    if [[ $found = false ]]
925    then
926       printf "\n  +++ no preprocessor options found in configuration file"
927       printf "\n      for \"$remote_host_string\" "
928       locat=config_file; exit
929    fi
930
931
932       # RECHNERSPEZIFISCHE CPP-DIREKTIVEN HINZUFUEGEN
933    for  string  in  $remote_host_string
934    do
935       if [[ $(echo $remote_host | cut -c1-2) = lc  &&  $(echo $string | cut -c1-2) = lc ]]
936       then
937          cpp_options="$cpp_options -D__lc "
938       elif [[ $(echo $remote_host | cut -c1-3) = ibm  &&  $(echo $string | cut -c1-3) = ibm ]]
939       then
940          cpp_options="${cpp_options},-D__ibm"
941       elif [[ $(echo $remote_host | cut -c1-3) = nec  &&  $(echo $string | cut -c1-3) = nec ]]
942       then
943          cpp_options="${cpp_options} -D__nec"
944       else
945          if [[ $(echo $remote_host | cut -c1-3) = ibm ]]
946          then
947             cpp_options="${cpp_options},-D__$string"
948          else
949             cpp_options="$cpp_options -D__$string "
950          fi
951       fi
952    done
953
954
955
956       # NETCDF-OPTIONEN ERMITTELN
957    line=""
958    grep  "$remote_host_string" $config_file | grep "%netcdf_inc"  >  tmp_mbuild
959    while read line1
960    do
961
962       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
963       then
964          line="$line1"
965       fi
966
967       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
968       then
969             # EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
970          netcdf_inc=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
971       fi
972
973    done < tmp_mbuild
974
975    line=""
976    grep  "$remote_host_string" $config_file | grep "%netcdf_lib"  >  tmp_mbuild
977    while read line1
978    do
979
980       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
981       then
982          line="$line1"
983       fi
984
985       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
986       then
987             # EVENTUELLE DOPPELPUNKTE AUS OPTIONSSTRING ENTFERNEN
988          netcdf_lib=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
989       fi
990
991    done < tmp_mbuild
992
993
994
995       # COMPILEROPTIONEN ERMITTELN
996    line=""
997    found=false
998    grep  "$remote_host_string" $config_file | grep "%fopts"  >  tmp_mbuild
999    while read line1
1000    do
1001
1002       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
1003       then
1004          line="$line1"
1005       fi
1006
1007       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
1008       then
1009             # EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
1010          compiler_options=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
1011          found=true
1012
1013             # NETCDF-INCLUDEVERZEICHNIS HINZUFUEGEN
1014          compiler_options="$compiler_options $netcdf_inc"
1015       fi
1016
1017    done < tmp_mbuild
1018
1019    if [[ $found = false ]]
1020    then
1021       printf "\n  +++ no compiler options found in configuration file"
1022       printf "\n      for \"$remote_host_string\" "
1023       locat=config_file; exit
1024    fi
1025
1026
1027
1028       # LADER-OPTIONEN ERMITTELN
1029    line=""
1030    found=false
1031    grep  "$remote_host_string" $config_file | grep "%lopts"  >  tmp_mbuild
1032    while read line1
1033    do
1034
1035       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
1036       then
1037          line="$line1"
1038       fi
1039
1040       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
1041       then
1042             # EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
1043          loader_options=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
1044          found=true
1045
1046             # NETCDF-LIBRARY HINZUFUEGEN
1047          loader_options="$loader_options $netcdf_lib"
1048       fi
1049
1050    done < tmp_mbuild
1051
1052    if [[ $found = false ]]
1053    then
1054       printf "\n  +++ no loader options found in configuration file"
1055       printf "\n      for \"$remote_host_string\" "
1056       locat=config_file; exit
1057    fi
1058
1059
1060    printf "\n\n#------------------------------------------------------------------------# \n"
1061    if [[ $remote_host = $local_host ]]
1062    then
1063       column1="remote_host:"; column2="$remote_host (= local host!)"
1064    else
1065       column1="remote_host:"; column2=$remote_host
1066    fi
1067    printf "| $column1$column2 | \n"
1068    printf "|                                                                        | \n"
1069    column1="conditions:"; column2="$condition1 $condition2"
1070    printf "| $column1$column2 | \n"
1071    column1="make depository:"; column2=$remote_md
1072    printf "| $column1$column2 | \n"
1073    if [[ $compile_utility_programs = true ]]
1074    then
1075       column1="utility directory:"; column2=$remote_ud
1076       printf "| $column1$column2 | \n"
1077    fi
1078    column1="username:"; column2=$remote_username
1079    printf "| $column1$column2 | \n"
1080    column1="addres:"; column2=$remote_addres
1081    printf "| $column1$column2 | \n"
1082    column1="compiler:"; column2=$compiler_name
1083    printf "| $column1$column2 | \n"
1084    if [[ $compile_utility_programs = true ]]
1085    then
1086       column1="serial compiler:"; column2=$compiler_name_ser
1087       printf "| $column1$column2 | \n"
1088    fi
1089    column1="cpp options:"; column2=$cpp_options
1090    printf "| $column1$column2 | \n"
1091    line=$(echo "$cpp_options" | cut -c51-)
1092    while [[ "$line" != "" ]]
1093    do
1094       column1=""
1095       column2=$line
1096       printf "| $column1$column2 | \n"
1097       line=$(echo "$line" | cut -c51-)
1098    done
1099    column1="compiler options:"; column2=$compiler_options
1100    printf "| $column1$column2 | \n"
1101    line=$(echo "$compiler_options" | cut -c51-)
1102    while [[ "$line" != "" ]]
1103    do
1104       column1=""
1105       column2=$line
1106       printf "| $column1$column2 | \n"
1107       line=$(echo "$line" | cut -c51-)
1108    done
1109    column1="loader options:"; column2=$loader_options
1110    printf "| $column1$column2 | \n"
1111    line=$(echo "$loader_options" | cut -c51-)
1112    while [[ "$line" != "" ]]
1113    do
1114       column1=""
1115       column2=$line
1116       printf "| $column1$column2 | \n"
1117       line=$(echo "$line" | cut -c51-)
1118    done
1119    printf "#------------------------------------------------------------------------# \n"
1120
1121    if [[ $silent = false ]]
1122    then
1123       answer=dummy
1124       printf "\n\n"
1125       while [[ "$answer" != y  &&  "$answer" != Y  && "$answer" != c  &&  "$answer" != C  && "$answer" != s  &&  "$answer" != S  &&  "$answer" != a  &&  "$answer" != A ]]
1126       do
1127          printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ?  "
1128          read  answer
1129       done
1130       if [[ $answer = a  ||  $answer = A ]]
1131       then
1132          locat=user_abort; exit
1133       fi
1134       if [[ $answer = c  ||  $answer = C ]]
1135       then
1136          silent=false
1137       fi
1138       if [[ $answer = s  ||  $answer = S ]]
1139       then
1140          continue
1141       fi
1142    fi
1143
1144
1145    if [[ $remote_mode = batch ]]
1146    then
1147
1148          # BATCH-JOB PARAMETER SETZEN
1149       case  $remote_host  in
1150           (t3eb)           queue=berte; memory=60; cputime=1000; xoption="-X 0";;
1151           (t3eh)           queue=comp_t3e; memory=60; cputime=360;;
1152           (t3ej2)          queue=normal; memory=60; cputime=1000; xoption="-X 0";;
1153           (t3ej5|ground.yonsei.ac.kr)  printf "\n  --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
1154       esac
1155
1156
1157          # BATCH-JOB ZUSAMMENSTELLEN
1158       printf "\n  *** creating batch-job for remote host"
1159       echo " "  >  mbuild_job
1160
1161          # AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
1162          # DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
1163       if [[ $remote_host = t3ej2 ]]
1164       then
1165          echo "set +vx"                       >>  mbuild_job
1166          echo ". .profile"                    >>  mbuild_job
1167          echo "set -x"                        >>  mbuild_job
1168       fi
1169
1170          # AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
1171       if [[ $host = t3eb  || $host = t3eh  ||  $host = t3ej2 ]]
1172       then
1173          echo "module list"                   >>  mbuild_job
1174       fi
1175
1176
1177          # WECHSEL IN TEMPORAERES VERZEICHNIS
1178       echo "cd ${remote_md}"  >>  mbuild_job
1179
1180
1181          # AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1182       echo  "scp  ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar  ${mainprog}_sources.tar"  >>  mbuild_job
1183#       echo  "[[ \$? != 0 ]]  &&  (echo "+++ scp failed"; exit)"  >>  mbuild_job
1184
1185
1186          # FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1187       echo  "[[ -f ${mainprog}_current_version.tar ]]  &&  tar -xvf  ${mainprog}_current_version.tar"  >>  mbuild_job
1188
1189
1190          # AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1191       echo  "tar -xvf  ${mainprog}_sources.tar"              >>  mbuild_job
1192
1193
1194          # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1195       echo  "make  PROG=$mainprog  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "  >>  mbuild_job
1196       echo  "chmod  u+w  *"                                  >>  mbuild_job
1197
1198          # NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1199       echo  "tar -cvf  ${mainprog}_current_version.tar  *.f90  *.o"  >>  mbuild_job
1200
1201
1202          # AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1203       echo  "make  clean"                                    >>  mbuild_job
1204       echo  "rm ${mainprog}_sources.tar"                     >>  mbuild_job
1205       echo  "rm *.f90 Makefile"                              >>  mbuild_job
1206
1207
1208
1209          # JOB MITTELS SUBJOB STARTEN
1210       printf "\n  *** sending batch job to remote host"
1211#       subjob  $xoption  -h $remote_host  -q $queue  -m $memory  -t $cputime  -v  mbuild_job
1212
1213
1214          # JOBFILE LOESCHEN
1215#       rm  aljob
1216
1217    else
1218
1219       if [[ $remote_host != $local_host ]]
1220       then
1221
1222          if [[ $compile_utility_programs = false ]]
1223          then
1224
1225                # AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1226                # FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1227             echo "  *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
1228             if [[ $remote_host != lctit ]]
1229             then
1230                ssh  ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]]  &&  (echo \"  *** ${remote_md} will be created\"; mkdir -p  ${remote_md})"
1231             else
1232                   # TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1233                   # MIT SSH, DESHALB AUFRUF PER PIPE
1234                print "[[ ! -d ${remote_md} ]]  &&  (echo \"  *** ${remote_md} will be created\"; mkdir -p  ${remote_md})"  |  ssh ${remote_username}@${remote_addres}  2>&1
1235             fi
1236             if [[ $local_host = decalpha ]]
1237             then
1238                   # DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
1239                   # IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1240                   # KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1241                remote_md=`echo $remote_md | sed 's/\$HOME\///'`
1242                /bin/scp  ${mainprog}_sources.tar  ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1243             else
1244                scp  ${mainprog}_sources.tar  ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1245             fi
1246
1247
1248
1249                # FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1250             echo "  *** untar previous update on remote host, if existing"
1251             if [[ $remote_host != lctit ]]
1252             then
1253                ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]]  &&  tar -xf  ${mainprog}_current_version.tar"
1254             else
1255                   # TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1256                   # MIT SSH, DESHALB AUFRUF PER PIPE
1257                print  "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]]  &&  tar -xf  ${mainprog}_current_version.tar"  |  ssh  ${remote_username}@${remote_addres}  2>&1
1258             fi
1259
1260
1261                # AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1262             echo "  *** untar actual sources on remote host"
1263             if [[ $remote_host != lctit ]]
1264             then
1265                ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; tar -xf  ${mainprog}_sources.tar"
1266             else
1267                   # TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1268                   # MIT SSH, DESHALB AUFRUF PER PIPE
1269                print  "cd ${remote_md}; tar -xf  ${mainprog}_sources.tar"  |  ssh  ${remote_username}@${remote_addres}  2>&1
1270             fi
1271
1272
1273                # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1274                # KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1275                # BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1276                # Z.B. DIE PFADE ZUM COMPILER)
1277             echo "  *** execute \"make\" on remote host"
1278
1279             if [[ $remote_host = nech ]]
1280             then
1281                make_call_string="sxmake  PROG=$mainprog  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
1282             else
1283                make_call_string="make  PROG=$mainprog  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
1284             fi
1285
1286             if [[ $remote_host = t3eh ]]
1287             then
1288       
1289                print "xterm\nexit\n cd ${remote_md}; make  PROG=$mainprog  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" " | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1290
1291             elif [[ $remote_host = t3ej2  ||  $remote_host = ibms  ||  $remote_host = ibmy ]]
1292             then
1293
1294                ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 | tee ${remote_host}_last_make_protokoll
1295
1296             elif [[ $remote_host = ibmb  ||  $remote_host = ibmh ]]
1297             then
1298
1299                print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1300
1301             elif [[ $remote_host = lctit ]]
1302             then
1303
1304                echo  " "  >  ${remote_host}_last_make_protokoll
1305                while [[ $(cat ${remote_host}_last_make_protokoll | grep -c "Forwarding to N1GE") = 0 ]]
1306                do
1307                   print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1308                done
1309
1310             else
1311
1312                print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1313
1314             fi
1315
1316             if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1317             then
1318                printf "\a\n  +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1319                if [[ $silent = false ]]
1320                then
1321                   answer=dummy
1322                   printf "\n"
1323                   while [[ "$answer" != c  &&  "$answer" != k ]]
1324                   do
1325                      printf "  >>> continue / list errors / kill mbuild (c/l/k) ? "
1326                      read  answer
1327                      if [[ "$answer" = l ]]
1328                      then
1329                         more ${remote_host}_last_make_protokoll
1330                      fi
1331                   done
1332                   if [[ $answer = k ]]
1333                   then
1334                      locat=user_abort; exit
1335                   fi
1336                fi
1337             fi
1338
1339
1340
1341                # NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1342             printf "\n  *** tar update on remote host ..."
1343             if [[ $remote_host != lctit ]]
1344             then
1345                ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; chmod u+w *; tar -cf  ${mainprog}_current_version.tar  *.f90 *.o *.mod"
1346             else
1347                   # TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1348                   # MIT SSH, DESHALB AUFRUF PER PIPE
1349                print  "cd ${remote_md}; chmod u+w *; tar -cf  ${mainprog}_current_version.tar  *.f90 *.o *.mod"  |  ssh  ${remote_username}@${remote_addres}  2>&1
1350             fi
1351
1352
1353                # AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1354#             printf "\n  *** \"make clean\" on remote host ..."
1355#             ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1356#             printf "\n"
1357
1358
1359
1360
1361             # GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1362             # AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1363             # FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1364          elif [[ $compile_utility_programs = true ]]
1365          then
1366
1367             printf "\n\n"
1368             echo "  *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1369             cd  ${local_source_path}/../SCRIPTS
1370
1371             if [[ $remote_host != lctit ]]
1372             then
1373                ssh  ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]]  &&  (echo \"  *** ${remote_ud} will be created\"; mkdir -p  ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]]  &&  (echo \"  *** ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1374             else
1375                   # TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1376                   # MIT SSH, DESHALB AUFRUF PER PIPE
1377                print "[[ ! -d ${remote_ud} ]]  &&  (echo \"  *** ${remote_ud} will be created\"; mkdir -p  ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]]  &&  (echo \"  *** ${remote_ud}/../SCRIPTS will be created\"; mkdir -p  ${remote_ud}/../SCRIPTS)"  |  ssh ${remote_username}@${remote_addres}  2>&1
1378             fi
1379
1380                # KOPIEREN DER SCRIPTE
1381             if [[ $local_host = decalpha ]]
1382             then
1383                   # DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
1384                   # IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1385                   # KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1386                remote_ud=`echo $remote_ud | sed 's/\$HOME\///'`
1387                /bin/scp  batch_scp mbuild mrun subjob  ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS  >  /dev/null
1388             else
1389                scp  batch_scp mbuild mrun subjob  ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS  >  /dev/null
1390             fi
1391
1392             cd  -  > /dev/null
1393             cd  ${local_source_path}/../UTIL
1394
1395
1396                # KOPIEREN DER UTILITY-PROGRAMME
1397             if [[ $local_host = decalpha ]]
1398             then
1399                   # DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
1400                   # IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1401                   # KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1402                remote_ud=`echo $remote_ud | sed 's/\$HOME\///'`
1403                /bin/scp  Makefile  *.f90  ${remote_username}@${remote_addres}:${remote_ud}  >  /dev/null
1404             else
1405                scp  Makefile  *.f90  ${remote_username}@${remote_addres}:${remote_ud}  >  /dev/null
1406             fi
1407
1408
1409
1410                # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1411                # KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1412                # BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1413                # Z.B. DIE PFADE ZUM COMPILER)
1414             echo "  *** execute \"make\" on remote host"
1415
1416             if [[ $remote_host = nech ]]
1417             then
1418                make_call_string="sxmake  F90=$compiler_name  F90_SER=$compiler_name_ser  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
1419             else
1420                make_call_string="make  F90=$compiler_name  F90_SER=$compiler_name_ser  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
1421             fi
1422
1423             if [[ $remote_host = ibms  ||  $remote_host = ibmy ]]
1424             then
1425
1426                ssh  ${remote_username}@${remote_addres}  "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1427
1428             elif [[ $remote_host = ibmb  ||  $remote_host = ibmh ]]
1429             then
1430
1431                print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres}
1432
1433             elif [[ $remote_host = lctit ]]
1434             then
1435
1436                echo  " "  >  ${remote_host}_last_make_protokoll
1437                while [[ $(cat ${remote_host}_last_make_protokoll | grep -c "Forwarding to N1GE") = 0 ]]
1438                do
1439                   print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1440                done
1441
1442             else
1443
1444                print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1445
1446             fi
1447
1448          fi    # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1449
1450          rm -rf  ${remote_host}_last_make_protokoll
1451
1452             # NUR AUF EINEM HLRN-RECHNER UEBERSETZEN
1453          [[ $remote_host = ibmb  ||  $remote_host = ibmh ]]  &&  ibm_hb_done=true
1454
1455       else
1456
1457          if [[ $compile_utility_programs = false ]]
1458          then
1459
1460                # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1461             echo " "
1462             echo "  *** execute \"make\" on local host"
1463
1464             make  PROG=$mainprog  F90=$compiler_name  COPT="$cpp_options"  F90FLAGS="$compiler_options"  LDFLAGS="$loader_options"  2>&1 | tee ${remote_host}_last_make_protokoll
1465
1466             if [[ $? != 0 ]]
1467             then
1468                printf "\a\n  +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1469                if [[ $silent = false ]]
1470                then
1471                   answer=dummy
1472                   printf "\n"
1473                   while [[ "$answer" != c  &&  "$answer" != k ]]
1474                   do
1475                      printf "  >>> continue / list errors / kill mbuild (c/l/k) ? "
1476                      read  answer
1477                      if [[ "$answer" = l ]]
1478                      then
1479                         more ${remote_host}_last_make_protokoll
1480                      fi
1481                   done
1482                   if [[ $answer = k ]]
1483                   then
1484                      locat=user_abort; exit
1485                   fi
1486                fi
1487             fi
1488
1489
1490                # NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
1491             printf "\n  *** tar update on local host ..."
1492             tar -cf  ${mainprog}_current_version.tar  *.$suf *.o *.mod
1493
1494
1495             # COMPILE THE UTILITY PROGRAMS
1496          elif [[ $compile_utility_programs = true ]]
1497          then
1498             printf "\n\n"
1499             echo "  *** compiling the utility programs ..."
1500             cd ${local_source_path}/../UTIL
1501             make  F90=$compiler_name  F90_SER=$compiler_name_ser  COPT="$cpp_options"  F90FLAGS="$compiler_options"  LDFLAGS="$loader_options"
1502             cd  -  > /dev/null
1503          fi
1504
1505
1506             # NUR EINMAL AUF LCMUK UEBERSETZEN
1507          [[ $remote_host = lcmuk ]]  &&  lcmuk_done=true
1508
1509       fi
1510
1511    fi
1512 done
1513
1514
1515 if [[ $host_found = false ]]
1516 then
1517    if [[ $host = all ]]
1518    then
1519       printf "\n  +++ no hosts found in configuration file"
1520    else
1521       printf "\n  +++ host \"$host\" not found in configuration file"
1522    fi
1523    locat=config_file; exit
1524 fi
1525
1526
1527
1528    # ABSCHLIESSENDE ARBEITEN
1529 rm -f  hosts_found_in_config_file
1530
Note: See TracBrowser for help on using the repository browser.