source: palm/tags/release-3.1c/SCRIPTS/mbuild @ 81

Last change on this file since 81 was 40, checked in by raasch, 17 years ago

documentation update for the new svn-based version and for 3.1c, update of .mrun.config.default, -u in mbuild only compiles scripts

File size: 54.6 KB
Line 
1#!/bin/ksh
2# mbuild - Programmuebersetzungsscript   Version:  @(#)MBUILD 1.0    02/03/07
3
4     # Prozedur zur Uebersetzung von Programmteilen mittels make-Mechanismus
5     # auf einem Remote-Rechner, ausgehend von Quellcode auf einem lokalen
6     # Rechner
7
8     # Folgende Probleme existieren unter Linux, wenn keine AT&T-Korn-Shell
9     # verwendet wird:
10     # Wertzuweisungen an Variablen innerhalb von DO-Schleifen werden nicht
11     # nach aussen weitergegeben. "while read line" funktioniert nicht
12     # innerhalb einer Pipe.
13
14     # letzte Aenderung:
15     # 06/05/02 - Siggi - Beginn der Entwicklung
16     # 12/06/02 - Siggi - Abschluss der Entwicklungsarbeiten
17     # 23/06/02 - Siggi - voerst kein make-clean, Abbruch bei batch-mode
18     # 24/07/02 - Siggi - Keine Verwendung der temporaeren Datei tmp_mbuild
19     #                    unter linux mehr noetig, da nun AT&T-Korn-Shell
20     #                    benutzt wird
21     # 12/09/02 - Siggi - ibmh (hanni.hlrn.de) validiert
22     # 19/12/02 - Siggi - ibmb validiert
23     # 05/02/03 - Siggi - hostname nobela included
24     # 04/03/03 - Siggi - host nech included
25     # 06/03/03 - Siggi - make_call_string is echoed without '' to
26     #                    file LAST_MAKE_CALL (otherwise error on NEC, because
27     #                    '' are part of compiler options
28     # 16/03/03 - Siggi - Two underscores are placed in front of every define
29     #                    string, in case that palm.f90 version contains
30     #                    such strings
31     # 16/04/03 - Siggi - First extensions for linux machines
32     # 24/06/03 - Siggi - host orkan included
33     # 17/07/03 - Siggi - IP adress set to new "cross" machine at DKRZ
34     # 24/07/03 - Siggi - host maestro admitted
35     # 06/08/03 - Siggi - host gregale admitted
36     # 05/11/03 - Siggi - hosts irifi and quanero are now belonging to lcmuk
37     # 19/11/03 - Heiko - on lcmuk, mbuild does not tar the *.i files
38     # 08/01/04 - Siggi - additional preprocessor directive for ibm included
39     #                    (-D$OMP=OMP) in order to avoid problems with
40     #                    OMP_NUM_THREADS
41     # 09/01/04 - Siggi - action above cancelled
42     # 28/01/04 - Siggi - action above re-cancelled
43     # 08/03/04 - Siggi - host scirocco admitted
44     # 26/03/04 - Siggi - .o and .mod files are also deleted in depository, if
45     #                    the respective .f90 file is not listed in the makefile
46     #                    and deletion is demanded by the user
47     # 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
48     #                    due to error in ssh installation (otherwise a prompt
49     #                    for the password appears)
50     # 23/07/04 - Siggi - changes due to the new berni configuration
51     #                    (federation switch)
52     # 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
53     # 23/09/04 - Joerg - correction of IP-Address for 'cross' (DKRZ)
54     # 09/03/05 - Siggi - on nech, mbuild does not tar the *.i files
55     # 31/03/05 - Siggi - mbuild does not tar *.i files any more
56     # 24/04/05 - Siggi - netcdf support on lcmuk
57     # 25/04/05 - Siggi - netcdf support on gfdl3 (decalpha)
58     # 12/05/05 - Siggi - netcdf support on ibm
59     #                    set OBJECT_MODE=64 for compiling on ibmb, ibmh
60     # 18/05/05 - Siggi - netcdf support on nec
61     # 19/05/05 - Siggi - IP addres 134.75.155.74 changed to 165.132.26.56
62     # 23/05/05 - Siggi - netcdf support on ibms
63     # 01/06/05 - Siggi - reset of cpp_options to "" on lcmuk
64     # 30/06/05 - Siggi - netcdf support on bora
65     # 20/10/05 - Siggi - update of netcdf-version on decalpha (gfdl3)
66     # 04/11/05 - Siggi - netcdf 3.6.0-p1 on ibmh/ibmb
67     # 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
68     #                    host gfdl5 (ibmy) admitted
69     # 10/01/06 - Siggi - cpp directive for NetCDF 64bit support
70     # 20/01/06 - Siggi - cpp directive for ibmy
71     # 09/02/06 - Marcus- compile only once on lcmuk (as on ibmh/ibmb)
72     # 10/02/06 - Siggi - modifications for scp on decalpha
73     # 13/04/06 - Siggi - ostria admitted
74     # 19/04/06 - Siggi - preprocessor directive -D$OMP=OMP for ibm removed
75     # 23/05/05 - Siggi - lctit (SUN Fire X4600) admitted
76     # 29/05/05 - Siggi - atmos (lcide) admitted
77     # 23/08/06 - Siggi - netcdf support for scirocco (notebook)
78     # 24/11/06 - Siggi - breva and levanto admitted
79     # 07/02/07 - Siggi - adapted for RIAM (neck)
80     # 10/02/07 - Siggi - all hpmuk-related code removed
81     # 02/03/07 - Siggi - compilation of utility programs and transfer of
82     #                    scripts to remote hosts added (option -u)
83
84
85
86    # VARIABLENVEREINBARUNGEN + DEFAULTWERTE
87 compile_utility_programs=false
88 config_file=.mrun.config
89 host=all
90 host_found=false
91 ibm_hb_done=false
92 lcmuk_done=false
93 locat=normal
94 makefile=""
95 remote_mode=interactive
96 scirocco=false
97 silent=false
98 suf=f90
99 update=false
100
101 typeset -i  ih ihost=0
102
103 typeset  -R50 calltime
104 typeset  -L20 column1
105 typeset  -L50 column2
106 typeset  -L70 column3
107 typeset  -L20 version="MBUILD  1.0"
108
109    # FEHLERBEHANDLUNG
110    # BEI EXIT:
111 trap 'if [[ $locat != normal ]]
112       then
113          printf "\n\n +++ mbuild killed \n\n"
114       else
115          printf "\n\n *** mbuild finished \n\n"
116       fi' exit
117
118
119    # BEI TERMINAL-BREAK:
120 trap 'printf "\n\n +++ mbuild killed by \"^C\" \n\n"
121       exit
122      ' 2
123
124
125
126    # SHELLSCRIPT-OPTIONEN EINLESEN
127 while  getopts  :c:h:m:rs:u  option
128 do
129   case  $option  in
130       (c)   config_file=$OPTARG;;
131       (h)   host=$OPTARG;;
132       (m)   makefile=$OPTARG;;
133       (r)   remote_mode=batch;;
134       (s)   suf=$OPTARG;;
135       (u)   compile_utility_programs=true;;
136       (\?)  printf "\n  +++ unknown option $OPTARG \n";
137             locat=parameter; exit;;
138   esac
139 done
140
141
142
143    # BATCH-MODE IST ZUR ZEIT NICHT FUNKTIONSFAEHIG
144 if [[ $remote_mode = batch ]]
145 then
146    printf "\n  +++ sorry, batch mode does not work! \n"
147    locat=parameter; exit
148 fi
149
150
151
152    # LOKALEN RECHNER ERMITTELN
153 local_host_real_name=$(hostname)
154 local_addres=$(nslookup `hostname` 2>&1 | grep "Address:" | tail -1 | awk '{print $2}')
155 case  $local_host_real_name  in
156     (atmos)                    local_host=lcide;;
157     (berte)                    local_host=t3eb;;
158     (bora|breva|gregale|irifi|levanto|maestro|orkan|ostria|quanero|scirocco)  local_host=lcmuk;;
159     (gate)                     local_host=neck;;
160     (gfdl3.yonsei.ac.kr)       local_host=decalpha; local_addres=165.132.26.56;;
161     (gfdl5)                    local_host=ibmy; local_addres=165.132.26.58;;
162     (gwdk081.gwdg.de)          local_host=ibm;;
163     (hreg01a-en0|hreg02a-en0)  local_host=ibmh;;
164     (nobel|nobela)             local_host=ibms;;
165     (tgg*)                     local_host=lctit;;
166     (t3e)                      local_host=t3eh;;
167     (zam003)                   local_host=t3ej2;;
168     (zam005)                   local_host=t3ej5;;
169     (*)       printf "\n  +++ local host \"$local_host_real_name\" not admitted for mbuild \n"
170               locat=local_host; exit;;
171 esac
172
173 [[ $local_host_real_name = scirocco ]]  &&  scirocco=true
174
175
176
177    # PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
178 if [[ ! -f $config_file ]]
179 then
180    printf "\n  +++ configuration file: "
181    printf "\n           $config_file"
182    printf "\n      does not exist"
183    locat=configuration; exit 
184 fi
185 if [[ $local_host != ibms ]]
186 then
187    config_file=$PWD/$config_file
188 else
189    config_file=`pwd`/$config_file
190 fi
191
192
193 
194    # BENUTZERNAMEN AUF LOKALEM RECHNER AUS KONFIGURATIONSDATEI ERMITTELN
195 line=""
196 grep  " $local_host" $config_file | grep "%remote_username"  |  while read line
197 do
198    if [[ "$line" != ""  ||  $(echo $line | cut -c1) != "#" ]]
199    then
200       local_username=`echo $line | cut -d" " -s -f2`
201    fi
202 done
203
204 if [[ "$local_username" = "" ]]
205 then
206    printf "\n  +++ no user name found in configuration file"
207    printf "\n      for local host \"$local_host\" "
208    locat=config_file; exit
209 fi
210
211
212    # LOKALEN QUELLTEXTPFAD ERMITTELN.
213    # ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
214    # VEREINBART WURDE.
215    # DAZU ZUNAECHST ALLE IN DER KONFIGURATIONSDATEI VEREINBARTEN GLOBALEN
216    # VARIABLEN SETZEN, WEIL DIESE EVTL. IN PFADNAMEN VERWENDET WERDEN
217 line=""
218 grep "%" $config_file  |  while read line
219 do
220    if [[ "$line" != ""  &&  "$(echo $line | cut -d" " -s -f3)" = "" ]]
221    then
222       var=`echo $line | cut -d" " -s -f1 | cut -c2-`
223       value=`echo $line | cut -d" " -s -f2`
224       eval export $var=\$value
225#       eval echo \"   $var=\$$var \"   # AUSGABE ZU TESTZWECKEN
226    fi
227 done
228
229    # NUN PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD VEREINBART WURDE
230 line=""
231 grep "%source_path" $config_file  |  while read line
232 do
233    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
234    then
235       if [[ "$(echo $line | cut -d" " -s -f3)" = "" ]]
236       then
237          global_source_path=`echo $line | cut -d" " -s -f2`
238       fi
239    fi
240 done
241
242 line=""
243 grep  " $local_host" $config_file | grep "%source_path"  |  while read line
244 do
245    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
246    then
247       local_source_path=`echo $line | cut -d" " -s -f2`
248    fi
249 done
250
251 if [[ "$local_source_path" = "" ]]
252 then
253    if [[ "$global_source_path" != "" ]]
254    then
255       local_source_path=$global_source_path
256    else
257       printf "\n  +++ no source path found in configuration file"
258       printf "\n      for local host \"$local_host\" "
259       printf "\n      please set \"\%source_path\" in configuration file"
260       locat=config_file; exit
261    fi
262 fi
263 eval local_source_path=$local_source_path
264 eval local_source_path=$local_source_path
265
266
267     # EBENSO PFAD FUER DAS MAKE-DEPOSITORY ERMITTELN
268 line=""
269 grep "%depository_path" $config_file  |  while read line
270 do
271    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
272    then
273       if [[ "$(echo $line | cut -d" " -s -f3)" = "" ]]
274       then
275          global_depository_path=`echo $line | cut -d" " -s -f2`
276       fi
277    fi
278 done
279
280 line=""
281 grep  " $local_host" $config_file | grep "%depository_path"  |  while read line
282 do
283    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
284    then
285       local_depository_path=`echo $line | cut -d" " -s -f2`
286    fi
287 done
288
289 if [[ "$local_depository_path" = "" ]]
290 then
291    if [[ "$global_depository_path" != "" ]]
292    then
293       local_depository_path=$global_depository_path
294    else
295       printf "\n  +++ no depository path found in configuration file"
296       printf "\n      for local host \"$local_host\" "
297       printf "\n      please set \"\%depository_path\" in configuration file"
298       locat=config_file; exit
299    fi
300 fi
301 eval local_depository_path=$local_depository_path
302 eval local_depository_path=$local_depository_path
303
304
305
306    # PRUEFEN, OB IN KONFIGURATIONSDATEI EIN HAUPTPROGRAMM
307    # VEREINBART WURDE
308 if [[ $(grep -c "%mainprog" $config_file) != 1 ]]
309 then
310    printf "\n  +++ no main program or more than one main program defined"
311    printf "\n      in configuration file"
312    locat=configuration; exit
313 else
314    line=`grep "%mainprog" $config_file`
315    if [[ "$line" = ""  ||  $(echo $line | cut -c1) = "#" ]]
316    then
317       printf "\n  +++ no main program defined in configuration file"
318       locat=configuration; exit
319    fi
320    mainprog=`echo $line | cut -d" " -s -f2 | cut -d"." -f1`
321 fi
322
323
324
325    # MAKEFILE vorhanden
326 [[ "$makefile" = "" ]]  &&  makefile=$local_source_path/Makefile
327 if [[ ! -f $makefile ]]
328 then
329    printf "\n  +++ makefile: "
330    printf "\n           $makefile"
331    printf "\n      does not exist"
332    locat=makefile; exit 
333 fi
334
335
336    # HEADER-AUSGABE (TEIL1: MELDUNGEN UEBER LOKALEN RECHNER)
337 calltime=$(date)
338 printf "\n"
339 printf "#------------------------------------------------------------------------# \n"
340 printf "| $version$calltime | \n"
341 printf "|                                                                        | \n"
342 column1="called on:"; column2=$local_host_real_name
343 printf "| $column1$column2 | \n"
344 column1="local username:"; column2=$local_username
345 printf "| $column1$column2 | \n"
346 column1="local IP-addres:"; column2=$local_addres
347 printf "| $column1$column2 | \n"
348 column1="config file:"; column2=$config_file
349 printf "| $column1$column2 | \n"
350 column1="makefile:"; column2=$makefile
351 printf "| $column1$column2 | \n"
352 column1="local source path:"; column2=$local_source_path
353 printf "| $column1$column2 | \n"
354 column1="make depository:"; column2=$local_depository_path
355 printf "| $column1$column2 | \n"
356 printf "#------------------------------------------------------------------------# \n"
357
358# printf "|                                                                        | \n"
359
360
361 if [[ $compile_utility_programs = false ]]
362 then
363
364    cd  $local_source_path
365
366
367       # LISTE DER ZU PRUEFENDEN QUELLTEXTDATEIEN ERSTELLEN
368    source_code_files=`ls -1  *.$suf`
369
370
371
372       # VERZEICHNIS FUER DAS MAKE-DEPOSITORY ERZEUGEN,
373       # FALLS NOCH NICHT VORHANDEN. ANSONSTEN ALLE DATEIEN
374       # NEUEREN DATUMS IN DIESES VERZEICHNIS KOPIEREN
375    if [[ ! -d $local_depository_path ]]
376    then
377       if  mkdir $local_depository_path
378       then
379          printf "\n\n  *** directory for make depository:"
380          printf "\n           $local_depository_path"
381          printf "\n      was created\n"
382
383             # MAKEFILE UND QUELLTEXTDATEIEN UNTER BEIBEHALTUNG
384             # IHRES DATUMS INS VERZEICHNIS KOPIEREN
385          printf "\n  *** makefile and source code files are copied to"
386          printf "\n      $local_depository_path\n"
387          printf "\n      copying makefile \"$makefile\" ..."
388          cp -p  $makefile  $local_depository_path/Makefile
389
390             # QUELLTEXTDATEIEN MUESSEN IM MAKEFILE AUFGEFUEHRT
391             # SEIN
392          for  filename  in  $source_code_files
393          do
394             if [[ $(grep -c $filename  $makefile) = 0 ]]
395             then
396                printf "\n  +++ source code file:"
397                printf "\n         $filename"
398                printf "\n      is not listed in makefile"
399                locat=makefile; exit
400             else
401                printf "\n      copying source code file \"$filename\" ..."
402                cp -p  $filename  $local_depository_path
403             fi
404          done
405          printf "\n"
406       else
407          printf "\n  +++ directory for make depository:"
408          printf "\n           $local_depository_path"
409          printf "\n      cannot be created"
410          locat=local_depository_path; exit
411       fi
412    else
413 
414       printf "\n  *** checking file status ..."
415
416          # MAKEFILE KOPIEREN, FALLS NEUEREN DATUMS
417       if [[ $makefile -nt $local_depository_path/Makefile ]]
418       then
419          printf "\n  *** update of \"$makefile\" "
420          cp -f -p  $makefile  $local_depository_path/Makefile
421          update=true
422
423             # PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY AUCH IM NEUEN MAKEFILE
424             # VERZEICHNET SIND UND GEGEBENENFALLS DATEIEN LOESCHEN
425          cd  $local_depository_path
426          source_code_files_in_depository=`ls -1  *.$suf`
427          for  filename  in  $source_code_files_in_depository
428          do
429             if [[ $(grep -c $filename  Makefile) = 0 ]]
430             then
431                printf "\n  *** source code file in \"$local_depository_path\":"
432                printf "\n         $filename"
433                printf "\n      is not listed in makefile"
434                if [[ $silent = false ]]
435                then
436                   answer=dummy
437                   printf "\n\n"
438                   while [[ "$answer" != y  &&  "$answer" != Y  &&  "$answer" != n  &&  "$answer" != N ]]
439                   do
440                      printf " >>> delete \"$filename\" in \"$local_depository_path\" (y/n) ?  "
441                      read  answer
442                   done
443                   if [[ $answer = y  ||  $answer = Y ]]
444                   then
445                      base=`echo $filename | cut -d. -f2`
446                      rm -f  $filename
447                      rm -f  ${base}.o  ${base}.mod
448                      printf "\n  *** \"$filename\" deleted in \"$local_depository_path\" "
449                   else
450                      printf "\n  *** \"$filename\" not deleted in \"$local_depository_path\" "
451                   fi
452                fi
453             fi
454          done
455          cd  -  > /dev/null  2>&1
456
457       elif [[ $local_depository_path/Makefile -nt $makefile ]]
458       then
459          printf "\n  *** makefile in depository is newer than"
460          printf "\n      \"$makefile\" "
461          if [[ $silent = false ]]
462          then
463             answer=dummy
464             printf "\n\n"
465             while [[ "$answer" != y  &&  "$answer" != Y  &&  "$answer" != n  &&  "$answer" != N ]]
466             do
467                printf " >>> update \"$makefile\" (y/n) ?  "
468                read  answer
469             done
470             if [[ $answer = y  ||  $answer = Y ]]
471             then
472                cp -f -p  $local_depository_path/Makefile  $makefile
473                printf "\n  *** \"$makefile\" updated"
474             else
475                printf "\n  *** \"$makefile\" not updated"
476             fi
477          fi
478       fi
479
480          # QUELLTEXTDATEIEN KOPIEREN, FALLS NEUEREN DATUMS
481          # SIE MUESSEN IM MAKEFILE AUFGEFUEHRT SEIN
482       for  filename  in  $source_code_files
483       do
484          if [[ $(grep -c $filename  $makefile) = 0 ]]
485          then
486             printf "\n  +++ source code file:"
487             printf "\n         $filename"
488             printf "\n      is not listed in makefile"
489             locat=makefile; exit
490          else
491             if [[ ! -f $local_depository_path/$filename ]]
492             then
493                cp -p  $filename  $local_depository_path
494                printf "\n  *** source code file \"$filename\" created in \"$local_depository_path\" "
495             fi
496             if [[ $filename -nt $local_depository_path/$filename ]]
497             then
498                printf "\n  *** update of source code file \"$filename\" "
499                cp -f -p  $filename  $local_depository_path
500                update=true
501             fi
502          fi
503       done
504
505
506          # PRUEFEN, OB ALLE DATEIEN IM DEPOSITORY IM AKTUELLEN ARBEITSVERZEICHNIS VORHANDEN
507          # ODER EVTL. NEUEREN DATUMS SIND
508       cd  $local_depository_path
509       source_code_files_in_depository=`ls -1  *.$suf`
510       cd  -  > /dev/null  2>&1
511       for  filename  in  $source_code_files_in_depository
512       do
513          if [[ ! -f $filename ]]
514          then
515             printf "\n  *** source code file \"$filename\" does not exist in current directory"
516             if [[ $silent = false ]]
517             then
518                answer=dummy
519                printf "\n\n"
520                while [[ "$answer" != y  &&  "$answer" != Y  &&  "$answer" != n  &&  "$answer" != N ]]
521                do
522                   printf " >>> create \"$filename\" in current directory (y/n) ?  "
523                   read  answer
524                done
525                if [[ $answer = y  ||  $answer = Y ]]
526                then
527                   cp -p  $local_depository_path/$filename  $filename
528                   printf "\n  *** source code file \"$filename\" created in current directory"
529                else
530                   printf "\n  *** source code file \"$filename\" not created in current directory"
531                fi
532             fi
533          elif [[ $local_depository_path/$filename -nt $filename ]]
534          then
535             ls -al $local_depository_path/$filename
536             ls -al $filename
537             printf "\n  *** source code file \"$filename\" in depository is newer than in current directory"
538             if [[ $silent = false ]]
539             then
540                answer=dummy
541                printf "\n\n"
542                while [[ "$answer" != y  &&  "$answer" != Y  &&  "$answer" != n  &&  "$answer" != N ]]
543                do
544                   printf " >>> update \"$filename\" in current directory (y/n) ?  "
545                   read  answer
546                done
547                if [[ $answer = y  ||  $answer = Y ]]
548                then
549                   cp -f -p  $local_depository_path/$filename  $filename
550                   printf "\n  *** source code file \"$filename\" updated in current directory"
551                else
552                   printf "\n  *** source code file \"$filename\" not updated in current directory"
553                fi
554             fi
555          fi
556       done
557
558       if [[ $update = false ]]
559       then
560          printf "\n  *** no updates necessary in \"$local_depository_path\" "
561          if [[ $silent = false ]]
562          then
563             answer=dummy
564             printf "\n\n"
565             while [[ "$answer" != y  &&  "$answer" != Y  &&  "$answer" != n  &&  "$answer" != N ]]
566             do
567                printf " >>> continue with updates on remote hosts (y/n) ?  "
568                read  answer
569             done
570             if [[ $answer = n  ||  $answer = N ]]
571             then
572                locat=user_abort; exit
573             fi
574          fi
575       fi
576    fi
577 
578
579 
580       # QUELLTEXTDATEIEN UND MAKEFILE MIT TAR ZUSAMMENBINDEN
581       # IN JEDEM FALL ALLEN DATEIEN WRITE-PERMIT GEBEN, DAMIT ES AUF
582       # DEN REMOTE-RECHNERN NICHT EVTL. ZU PROBLEMEN BEIM UEBERSCHREIBEN KOMMT
583    printf "\n\n  *** tar of makefile and source files in depository ..." 
584    cd  $local_depository_path
585    chmod u+w  Makefile  *.$suf
586    tar -cf  ${mainprog}_sources.tar  Makefile  *.$suf
587    printf "\n"
588
589 fi
590
591
592
593    # BESTAETIGUNG ZUM WEITERMACHEN EINHOLEN
594 if [[ $host = all ]]
595 then
596    printf "\n  *** updates will be made for ALL hosts found in"
597    printf "\n      the configuration file"
598 else
599    printf "\n  *** update will be made for host \"$host\" "
600 fi
601
602 if [[ $silent = false ]]
603 then
604    answer=dummy
605    printf "\n\n"
606    while [[ "$answer" != y  &&  "$answer" != Y  &&  "$answer" != n  &&  "$answer" != N ]]
607    do
608       printf " >>> continue (y/n) ?  "
609       read  answer
610    done
611    if [[ $answer = n  ||  $answer = N ]]
612    then
613       locat=user_abort; exit
614    fi
615 fi
616 
617 
618
619   
620    # GENERIERUNG DER AKTUELLEN MODELLVERSION FUER ALLE RECHNER-/UEBERSETZUNGS-
621    # VERSIONEN, DIE IN DER KONFIGURATIONSDATEI GEFUNDEN WERDEN
622 printf "\n  *** scanning configuration file for host(s) ..."
623
624 grep  %fopts  $config_file  |  while read line
625 do
626       # KOMMENTARZEILEN UEBERSPRINGEN
627    [[ $(echo $line | cut -c1) = "#" ]]  &&  continue
628    (( ihost = ihost + 1 ))
629    hostline[$ihost]="$line"
630 done
631
632 
633 while (( ih < ihost ))
634 do
635
636    (( ih = ih + 1 ))
637
638       # REMOTE-RECHNER UND UEBERSETZUNGS-VERSION FESTSTELLEN
639       # NUR WEITERMACHEN, WENN ENTSPRECHENDER REMOTE-RECHNER MITTELS
640       # SHELLSCRIPT-OPTION AUCH AUSGEWAEHLT WURDE
641    remote_host_string=`echo ${hostline[$ih]} | cut -d" " -s -f3-`
642    remote_host=`echo $remote_host_string | cut -d" " -f1`
643    if [[ $host != all ]]
644    then
645       [[ $remote_host != $host ]]  &&  continue
646    fi
647    host_found=true
648    condition1=`echo $remote_host_string | cut -d" " -s -f2`
649    if [[ $condition1 = $remote_host ]]
650    then
651       condition1=""
652    else
653       condition2=`echo $remote_host_string | cut -d" " -s -f3`
654    fi
655
656
657       # AUF HLRN-RECHNER NUR EINMAL UEBERSETZEN
658    if [[ $remote_host = ibmb  ||  $remote_host = ibmh ]]
659    then
660       if [[ $ibm_hb_done = true ]]
661       then
662          printf "\n *** remote host \"$remote_host\" skipped since compilation has already"
663          printf "\n     been carried out on one of the HLRN machines\n"
664          continue
665       fi
666    fi
667
668       # AUF LCMUK-RECHNER NUR EINMAL UEBERSETZEN
669    if [[ $remote_host = lcmuk ]]
670    then
671       if [[ $lcmuk_done = true ]]
672       then
673          printf "\n *** local host \"$remote_host\" skipped since compilation has already"
674          printf "\n     been carried out on this host\n"
675          continue
676       fi
677    fi
678
679
680       # IP-ADRESSE DES REMOTE-RECHNERS BESTIMMEN
681    netcdf_support=false
682    case  $remote_host  in
683        (lcmuk)          remote_addres=130.75.105.3; cpp_options=""
684                         netcdf_support=true
685                         if [[ $scirocco = true ]]
686                         then
687                            netcdf_path=/opt/netcdf/3.6.2-beta4
688                         else
689                            netcdf_path=/muksoft/packages/netcdf/linux
690                         fi;;
691        (lctit)          remote_addres=172.17.75.161; netcdf_support=true
692                         netcdf_path=/home/usr5/mkanda/netcdf-3.6.1/src; cpp_options="-Mpreprocess";;
693        (decalpha)       remote_addres=165.132.26.56; cpp_options="-cpp"; netcdf_support=true
694                         netcdf_path=/usr/local/netcdf-3.5.1;;
695        (ibm)            remote_addres=134.76.99.81; cpp_options="-qsuffix=cpp=f90";;
696        (ibmb)           remote_addres=130.73.230.10; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
697                         netcdf_path=/aws/dataformats/netcdf-3.6.0-p1/64-32;;
698        (ibmh)           remote_addres=130.75.4.10; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
699                         netcdf_path=/aws/dataformats/netcdf-3.6.0-p1/64-32;;
700        (ibms)           remote_addres=150.183.5.101; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
701                         netcdf_path=/applic/lib/NETCDF64;;
702        (ibmy)           remote_addres=165.132.26.58; cpp_options="-qsuffix=cpp=f90"; netcdf_support=true
703                         netcdf_path=/usr1/users/raasch/pub/netcdf-3.6.0-p1;;
704        (nech)           remote_addres=136.172.44.192; cpp_options="-Ep"; netcdf_support=true
705                         netcdf_path=/pool/SX-6/netcdf/netcdf-3.6.0-p1;;
706        (neck)           remote_addres=133.5.178.11; cpp_options="-Ep"; netcdf_support=true
707                         netcdf_path=/home/DSRC/NC/tatuyama/pub/netcdf-3.6.0-p1;;
708        (t3eb)           remote_addres=130.73.206.21; cpp_options="-eZ";;
709        (t3eh)           remote_addres=130.75.4.131; cpp_options="-eZ";;
710        (t3ej2)          remote_addres=134.94.100.22; cpp_options="-eZ";;
711        (t3ej5)          remote_addres=134.94.100.49; cpp_options="-eZ";;
712        (ground.yonsei.ac.kr) remote_addres=134.75.155.33;;
713     (*)                 printf "\n  +++ remote host \"$remote_host\" unknown";
714                         printf "\n      please inform S. Raasch!";
715                         locat=config_file; exit;;
716    esac
717
718
719       # REMOTE-USERNAMEN ERMITTELN
720    line=""
721    grep  "$remote_host_string" $config_file | grep "%remote_username"  |  while read line1
722    do
723       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
724       then
725          line="$line1"
726       fi
727    done
728
729    if [[ "$line" = ""  ||  $(echo $line | cut -c1) = "#" ]]
730    then
731       printf "\n  +++ no remote username found in configuration file"
732       printf "\n      for \"$remote_host_string\" "
733       locat=config_file; exit
734    else
735       remote_username=`echo $line | cut -d" " -s -f2`
736    fi
737
738
739       # REMOTE-QUELLTEXTPFAD ERMITTELN
740    line=""
741    grep  "$remote_host_string" $config_file | grep "%source_path"  |  while read line1
742    do
743       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
744       then
745          line="$line1"
746       fi
747    done
748
749    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
750    then
751       remote_source_path=`echo $line | cut -d" " -s -f2`
752    fi
753    if [[ "$remote_source_path" = "" ]]
754    then
755       if [[ "$global_source_path" != "" ]]
756       then
757          remote_source_path=$global_source_path
758       else
759          printf "\n  +++ no source path found in configuration file"
760          printf "\n      for \"$remote_host_string\" "
761          locat=config_file; exit
762       fi
763    fi
764
765    remote_ud=${remote_source_path}/../UTIL
766    remote_ud=$(eval echo $remote_ud)
767
768       # REMOTE-PFAD FUER MAKE-DEPOSITORY ERMITTELN
769    line=""
770    grep  "$remote_host_string" $config_file | grep "%depository_path"  |  while read line1
771    do
772       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
773       then
774          line="$line1"
775       fi
776    done
777
778    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
779    then
780       remote_md=`echo $line | cut -d" " -s -f2`
781    fi
782    if [[ "$remote_md" = "" ]]
783    then
784       if [[ "$global_depository_path" != "" ]]
785       then
786          remote_md=$global_depository_path
787       else
788          printf "\n  +++ no depository path found in configuration file"
789          printf "\n      for \"$remote_host_string\" "
790          printf "\n      please set \"\%depository_path\" in configuration file"
791          locat=config_file; exit
792       fi
793    fi
794
795    remote_md=$(eval echo $remote_md)
796
797
798       # COMPILERNAMEN ERMITTELN
799    line=""
800    grep  "$remote_host_string" $config_file | grep "%compiler_name "  |  while read line1
801    do
802       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
803       then
804          line="$line1"
805       fi
806    done
807
808    if [[ "$line" = ""  ||  $(echo $line | cut -c1) = "#" ]]
809    then
810       printf "\n  +++ no compiler name found in configuration file"
811       printf "\n      for \"$remote_host_string\" "
812       locat=config_file; exit
813    else
814       compiler_name=`echo $line | cut -d" " -s -f2`
815    fi
816
817
818       # BEI BENUTZUNG EINES PARALLELEN COMPILERS MUSS AUCH EIN
819       # SERIELLER COMPILERNAME ERMITTELT WERDEN
820    if [[ $(echo $remote_host_string | grep -c parallel) = 1 ]]
821    then
822       line=""
823       grep  "$remote_host_string" $config_file | grep "%compiler_name_ser"  |  while read line1
824       do
825          if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
826          then
827             line="$line1"
828          fi
829       done
830
831       if [[ "$line" = ""  ||  $(echo $line | cut -c1) = "#" ]]
832       then
833          printf "\n  +++ no serial compiler name found in configuration file"
834          printf "\n      for \"$remote_host_string\" "
835          locat=config_file; exit
836       else
837          compiler_name_ser=`echo $line | cut -d" " -s -f2`
838       fi
839    else
840       compiler_name_ser=$compiler_name
841    fi
842
843
844
845       # PRAEPROZESSOR-DIREKTIVEN SETZEN
846    if [[ $(echo $remote_host | cut -c1-3) = ibm ]]
847    then
848       if [[ $remote_host = ibms ]]
849       then
850          cpp_options="$cpp_options -WF,-DMPI_REAL=MPI_DOUBLE_PRECISION"
851          [[ $netcdf_support = true ]]  &&  cpp_options="${cpp_options},-D__netcdf"
852       else
853          cpp_options="$cpp_options -WF,-DMPI_REAL=MPI_DOUBLE_PRECISION"
854          [[ $netcdf_support = true ]]  &&  cpp_options="${cpp_options},-D__netcdf,-D__netcdf_64bit"
855          [[ $remote_host = ibmy ]]  &&  cpp_options="${cpp_options},-D__ibmy_special"
856       fi
857    elif [[ $remote_host = lcmuk ]]
858    then
859       cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
860       [[ $netcdf_support = true ]]  &&  cpp_options="$cpp_options -D__netcdf -D__netcdf_64bit"
861    elif [[ $remote_host = lctit ]]
862    then
863       cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
864       [[ $netcdf_support = true ]]  &&  cpp_options="$cpp_options -D__netcdf"
865    elif [[ $remote_host = decalpha ]]
866    then
867       cpp_options="$cpp_options -DMPI_REAL=MPI_DOUBLE_PRECISION -DMPI_2REAL=MPI_2DOUBLE_PRECISION"
868       [[ $netcdf_support = true ]]  &&  cpp_options="$cpp_options -D__netcdf"
869    elif [[ $remote_host = nech  ||  $remote_host = neck ]]
870    then
871       cpp_options="$cpp_options -DMPI_REAL=MPI_REAL8 -DMPI_2REAL=MPI_2REAL8 -DSCFFT=DZFFT -DCSFFT=ZDFFT"
872       [[ $netcdf_support = true ]]  &&  cpp_options="$cpp_options -D__netcdf -D__netcdf_64bit"
873    fi
874
875    if [[ $(echo $remote_host | cut -c1-3) = ibm ]]
876    then
877       for  string  in  $remote_host_string
878       do
879          if [[ $(echo $string | cut -c1-3) = ibm ]]
880          then
881             cpp_options="${cpp_options},-D__ibm"
882             if [[ $remote_host = ibmy ]]
883             then
884                cpp_options="${cpp_options},-D__ibmy_special"
885             fi
886          else
887             cpp_options="${cpp_options},-D__$string"
888          fi
889       done
890       cpp_options="$cpp_options "
891    elif [[ $remote_host = nech  ||  $remote_host = neck ]]
892    then
893       for  string  in  $remote_host_string
894       do
895          if [[ $(echo $string | cut -c1-3) = nec ]]
896          then
897             cpp_options="${cpp_options} -D__nec"
898          else
899             cpp_options="${cpp_options} -D__$string"
900          fi
901       done
902       cpp_options="$cpp_options "
903    else
904       for  string  in  $remote_host_string
905       do
906          cpp_options="$cpp_options -D__$string "
907       done
908    fi
909
910
911       # COMPILEROPTIONEN ERMITTELN
912    line=""
913    grep  "$remote_host_string" $config_file | grep "%fopts"  |  while read line1
914    do
915       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
916       then
917          line="$line1"
918       fi
919    done
920    if [[ "$line" = ""  ||  $(echo $line | cut -c1) = "#" ]]
921    then
922       printf "\n  +++ no compiler options found in configuration file"
923       printf "\n      for \"$remote_host_string\" "
924       locat=config_file; exit
925    else
926          # EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
927       compiler_options=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
928    fi
929    if [[ $netcdf_support = true ]]
930    then
931       case  $remote_host  in
932          (decalpha)  compiler_options="-I${netcdf_path}/include  $compiler_options";;
933          (ibmb|ibmh) compiler_options="-I ${netcdf_path}/include-64  $compiler_options";;
934          (ibms)      compiler_options="-I /applic/netcdf64/src/f90  $compiler_options";;
935          (ibmy)      compiler_options="-I ${netcdf_path}/include  $compiler_options";;
936          (lcmuk)     compiler_options="-I ${netcdf_path}/include  $compiler_options";;
937          (lctit)     compiler_options="-I ${netcdf_path}/f90      $compiler_options";;
938          (nech|neck) compiler_options="-I ${netcdf_path}/include  $compiler_options";;
939       esac
940    fi
941
942
943
944       # LADER-OPTIONEN ERMITTELN
945    line=""
946    grep  "$remote_host_string" $config_file | grep "%lopts"  |  while read line1
947    do
948       if [[ $(echo $line1 | cut -d" " -s -f3-) = "$remote_host_string" ]]
949       then
950          line="$line1"
951       fi
952    done
953
954    if [[ "$line" = ""  ||  $(echo $line | cut -c1) = "#" ]]
955    then
956       printf "\n  +++ no loader options found in configuration file"
957       printf "\n      for \"$remote_host_string\" "
958       locat=config_file; exit
959    else
960          # EVENTUELLE DOPPELPUNKTE AUS DIREKTIVENSTRING ENTFERNEN
961       loader_options=`echo $line | cut -d" " -s -f2 | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`
962    fi
963    if [[ $netcdf_support = true ]]
964    then
965       case  $remote_host  in
966          (decalpha)                   loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
967          (ibmb|ibmh|lcmuk|nech|neck)  loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
968          (ibms)                       loader_options="$loader_options -L${netcdf_path} -lnetcdf";;
969          (ibmy)                       loader_options="$loader_options -L${netcdf_path}/lib -lnetcdf";;
970          (lctit)                      loader_options="$loader_options -L${netcdf_path}/libsrc -lnetcdf";;
971       esac
972    fi
973
974
975    printf "\n\n#------------------------------------------------------------------------# \n"
976    if [[ $remote_host = $local_host ]]
977    then
978       column1="remote_host:"; column2="$remote_host (= local host!)"
979    else
980       column1="remote_host:"; column2=$remote_host
981    fi
982    printf "| $column1$column2 | \n"
983    printf "|                                                                        | \n"
984    column1="conditions:"; column2="$condition1 $condition2"
985    printf "| $column1$column2 | \n"
986    column1="make depository:"; column2=$remote_md
987    printf "| $column1$column2 | \n"
988    if [[ $compile_utility_programs = true ]]
989    then
990       column1="utility directory:"; column2=$remote_ud
991       printf "| $column1$column2 | \n"
992    fi
993    column1="username:"; column2=$remote_username
994    printf "| $column1$column2 | \n"
995    column1="addres:"; column2=$remote_addres
996    printf "| $column1$column2 | \n"
997    column1="compiler:"; column2=$compiler_name
998    printf "| $column1$column2 | \n"
999    if [[ $compile_utility_programs = true ]]
1000    then
1001       column1="serial compiler:"; column2=$compiler_name_ser
1002       printf "| $column1$column2 | \n"
1003    fi
1004    column1="cpp options:"; column2=$cpp_options
1005    printf "| $column1$column2 | \n"
1006    line=$(echo "$cpp_options" | cut -c51-)
1007    while [[ "$line" != "" ]]
1008    do
1009       column1=""
1010       column2=$line
1011       printf "| $column1$column2 | \n"
1012       line=$(echo "$line" | cut -c51-)
1013    done
1014    column1="compiler options:"; column2=$compiler_options
1015    printf "| $column1$column2 | \n"
1016    line=$(echo "$compiler_options" | cut -c51-)
1017    while [[ "$line" != "" ]]
1018    do
1019       column1=""
1020       column2=$line
1021       printf "| $column1$column2 | \n"
1022       line=$(echo "$line" | cut -c51-)
1023    done
1024    column1="loader options:"; column2=$loader_options
1025    printf "| $column1$column2 | \n"
1026    line=$(echo "$loader_options" | cut -c51-)
1027    while [[ "$line" != "" ]]
1028    do
1029       column1=""
1030       column2=$line
1031       printf "| $column1$column2 | \n"
1032       line=$(echo "$line" | cut -c51-)
1033    done
1034    printf "#------------------------------------------------------------------------# \n"
1035
1036    if [[ $silent = false ]]
1037    then
1038       answer=dummy
1039       printf "\n\n"
1040       while [[ "$answer" != y  &&  "$answer" != Y  && "$answer" != c  &&  "$answer" != C  && "$answer" != s  &&  "$answer" != S  &&  "$answer" != a  &&  "$answer" != A ]]
1041       do
1042          printf " >>> continue (y(es)/c(ontinue)/a(bort)/s(skip)) ?  "
1043          read  answer
1044       done
1045       if [[ $answer = a  ||  $answer = A ]]
1046       then
1047          locat=user_abort; exit
1048       fi
1049       if [[ $answer = c  ||  $answer = C ]]
1050       then
1051          silent=false
1052       fi
1053       if [[ $answer = s  ||  $answer = S ]]
1054       then
1055          continue
1056       fi
1057    fi
1058
1059
1060    if [[ $remote_mode = batch ]]
1061    then
1062
1063          # BATCH-JOB PARAMETER SETZEN
1064       case  $remote_host  in
1065           (t3eb)           queue=berte; memory=60; cputime=1000; xoption="-X 0";;
1066           (t3eh)           queue=comp_t3e; memory=60; cputime=360;;
1067           (t3ej2)          queue=normal; memory=60; cputime=1000; xoption="-X 0";;
1068           (t3ej5|ground.yonsei.ac.kr)  printf "\n  --- remote host \"$remote_host\" does not allow batch jobs"; continue;;
1069       esac
1070
1071
1072          # BATCH-JOB ZUSAMMENSTELLEN
1073       printf "\n  *** creating batch-job for remote host"
1074       echo " "  >  mbuild_job
1075
1076          # AUF CRAY-RECHNERN IN JUELICH WIRD KEIN BENUTZER-PROFILE AUSGEFUEHRT
1077          # DIES WIRD HIER GETAN, UM PFADE USW. ZU SETZEN
1078       if [[ $remote_host = t3ej2 ]]
1079       then
1080          echo "set +vx"                       >>  mbuild_job
1081          echo ". .profile"                    >>  mbuild_job
1082          echo "set -x"                        >>  mbuild_job
1083       fi
1084
1085          # AUF CRAY-RECHNERN GELADENE MODULE AUFLISTEN
1086       if [[ $host = t3eb  || $host = t3eh  ||  $host = t3ej2 ]]
1087       then
1088          echo "module list"                   >>  mbuild_job
1089       fi
1090
1091
1092          # WECHSEL IN TEMPORAERES VERZEICHNIS
1093       echo "cd ${remote_md}"  >>  mbuild_job
1094
1095
1096          # AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1097       echo  "scp  ${local_username}@${local_addres}:~/modell/code_3dp/palm_current_version/${mainprog}_sources.tar  ${mainprog}_sources.tar"  >>  mbuild_job
1098#       echo  "[[ \$? != 0 ]]  &&  (echo "+++ scp failed"; exit)"  >>  mbuild_job
1099
1100
1101          # FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1102       echo  "[[ -f ${mainprog}_current_version.tar ]]  &&  tar -xvf  ${mainprog}_current_version.tar"  >>  mbuild_job
1103
1104
1105          # AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1106       echo  "tar -xvf  ${mainprog}_sources.tar"              >>  mbuild_job
1107
1108
1109          # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1110       echo  "make  PROG=$mainprog  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "  >>  mbuild_job
1111       echo  "chmod  u+w  *"                                  >>  mbuild_job
1112
1113          # NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1114       echo  "tar -cvf  ${mainprog}_current_version.tar  *.f90  *.o"  >>  mbuild_job
1115
1116
1117          # AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1118       echo  "make  clean"                                    >>  mbuild_job
1119       echo  "rm ${mainprog}_sources.tar"                     >>  mbuild_job
1120       echo  "rm *.f90 Makefile"                              >>  mbuild_job
1121
1122
1123
1124          # JOB MITTELS SUBJOB STARTEN
1125       printf "\n  *** sending batch job to remote host"
1126#       subjob  $xoption  -h $remote_host  -q $queue  -m $memory  -t $cputime  -v  mbuild_job
1127
1128
1129          # JOBFILE LOESCHEN
1130#       rm  aljob
1131
1132    else
1133
1134       if [[ $remote_host != $local_host ]]
1135       then
1136
1137          if [[ $compile_utility_programs = false ]]
1138          then
1139
1140                # AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1141                # FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1142             echo "  *** copying \"${mainprog}_sources.tar\" to \"${remote_addres}:${remote_md}/\" "
1143             if [[ $remote_host != lctit ]]
1144             then
1145                ssh  ${remote_username}@${remote_addres} "[[ ! -d ${remote_md} ]]  &&  (echo \"  *** ${remote_md} will be created\"; mkdir -p  ${remote_md})"
1146             else
1147                   # TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1148                   # MIT SSH, DESHALB AUFRUF PER PIPE
1149                print "[[ ! -d ${remote_md} ]]  &&  (echo \"  *** ${remote_md} will be created\"; mkdir -p  ${remote_md})"  |  ssh ${remote_username}@${remote_addres}  2>&1
1150             fi
1151             if [[ $local_host = decalpha ]]
1152             then
1153                   # DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
1154                   # IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1155                   # KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1156                remote_md=`echo $remote_md | sed 's/\$HOME\///'`
1157                /bin/scp  ${mainprog}_sources.tar  ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1158             else
1159                scp  ${mainprog}_sources.tar  ${remote_username}@${remote_addres}:${remote_md}/${mainprog}_sources.tar
1160             fi
1161
1162
1163
1164                # FALLS VORHANDEN, LETZTE VERSION AUF DEM REMOTE-RECHNER AUSPACKEN
1165             echo "  *** untar previous update on remote host, if existing"
1166             if [[ $remote_host != lctit ]]
1167             then
1168                ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]]  &&  tar -xf  ${mainprog}_current_version.tar"
1169             else
1170                   # TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1171                   # MIT SSH, DESHALB AUFRUF PER PIPE
1172                print  "cd ${remote_md}; [[ -f ${mainprog}_current_version.tar ]]  &&  tar -xf  ${mainprog}_current_version.tar"  |  ssh  ${remote_username}@${remote_addres}  2>&1
1173             fi
1174
1175
1176                # AKTUELLE QUELLTEXTVERSION AUF REMOTE-RECHNER AUSPACKEN
1177             echo "  *** untar actual sources on remote host"
1178             if [[ $remote_host != lctit ]]
1179             then
1180                ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; tar -xf  ${mainprog}_sources.tar"
1181             else
1182                   # TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1183                   # MIT SSH, DESHALB AUFRUF PER PIPE
1184                print  "cd ${remote_md}; tar -xf  ${mainprog}_sources.tar"  |  ssh  ${remote_username}@${remote_addres}  2>&1
1185             fi
1186
1187
1188                # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1189                # KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1190                # BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1191                # Z.B. DIE PFADE ZUM COMPILER)
1192             echo "  *** execute \"make\" on remote host"
1193
1194             if [[ $remote_host = nech ]]
1195             then
1196                make_call_string="sxmake  PROG=$mainprog  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
1197             else
1198                make_call_string="make  PROG=$mainprog  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
1199             fi
1200
1201             if [[ $remote_host = t3eh ]]
1202             then
1203       
1204                print "xterm\nexit\n cd ${remote_md}; make  PROG=$mainprog  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" " | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1205
1206             elif [[ $remote_host = t3ej2  ||  $remote_host = ibms  ||  $remote_host = ibmy ]]
1207             then
1208
1209                ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; echo '$make_call_string' > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" 2>&1 | tee ${remote_host}_last_make_protokoll
1210
1211             elif [[ $remote_host = ibmb  ||  $remote_host = ibmh ]]
1212             then
1213
1214                print "export OBJECT_MODE=64; cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1215
1216             elif [[ $remote_host = lctit ]]
1217             then
1218
1219                echo  " "  >  ${remote_host}_last_make_protokoll
1220                while [[ $(cat ${remote_host}_last_make_protokoll | grep -c "Forwarding to N1GE") = 0 ]]
1221                do
1222                   print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1223                done
1224
1225             else
1226
1227                print "cd ${remote_md}; echo $make_call_string > LAST_MAKE_CALL; chmod u+x LAST_MAKE_CALL; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1228
1229             fi
1230
1231             if [[ $(grep -c MAKE_ERROR ${remote_host}_last_make_protokoll) != 0 ]]
1232             then
1233                printf "\a\n  +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1234                if [[ $silent = false ]]
1235                then
1236                   answer=dummy
1237                   printf "\n"
1238                   while [[ "$answer" != c  &&  "$answer" != k ]]
1239                   do
1240                      printf "  >>> continue / list errors / kill mbuild (c/l/k) ? "
1241                      read  answer
1242                      if [[ "$answer" = l ]]
1243                      then
1244                         more ${remote_host}_last_make_protokoll
1245                      fi
1246                   done
1247                   if [[ $answer = k ]]
1248                   then
1249                      locat=user_abort; exit
1250                   fi
1251                fi
1252             fi
1253
1254
1255
1256                # NEUE VERSION AUF REMOTE-RECHNER ZUSAMMENPACKEN
1257             printf "\n  *** tar update on remote host ..."
1258             if [[ $remote_host != lctit ]]
1259             then
1260                ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; chmod u+w *; tar -cf  ${mainprog}_current_version.tar  *.f90 *.o *.mod"
1261             else
1262                   # TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1263                   # MIT SSH, DESHALB AUFRUF PER PIPE
1264                print  "cd ${remote_md}; chmod u+w *; tar -cf  ${mainprog}_current_version.tar  *.f90 *.o *.mod"  |  ssh  ${remote_username}@${remote_addres}  2>&1
1265             fi
1266
1267
1268                # AKTUELLES VERSIONSVERZEICHNIS AUF REMOTE-RECHNER BEREINIGEN
1269#             printf "\n  *** \"make clean\" on remote host ..."
1270#             ssh  ${remote_username}@${remote_addres}  "cd ${remote_md}; make clean; rm ${mainprog}_sources.tar; rm *.f90 Makefile"
1271#             printf "\n"
1272
1273
1274
1275
1276             # GLEICHE AKTIONEN FUER DIE UTILITY-PROGRAMME DURCHFUEHREN
1277             # AKTUELLE QUELLTEXTVERSION INS REMOTE-QUELLTEXTVERZEICHNIS KOPIEREN
1278             # FALLS DIESES NOCH NICHT EXISTIERT, WIRD ES ERZEUGT
1279          elif [[ $compile_utility_programs = true ]]
1280          then
1281
1282             printf "\n\n"
1283             echo "  *** copying scripts and utility programs to \"${remote_addres}:${remote_ud}/\" "
1284             cd  ${local_source_path}/../SCRIPTS
1285
1286             if [[ $remote_host != lctit ]]
1287             then
1288                ssh  ${remote_username}@${remote_addres} "[[ ! -d ${remote_ud} ]]  &&  (echo \"  *** ${remote_ud} will be created\"; mkdir -p  ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]]  &&  (echo \"  *** ${remote_ud}/../SCRIPTS will be created\"; mkdir -p ${remote_ud}/../SCRIPTS)"
1289             else
1290                   # TIT ERLAUBT NUR DIE AUSFÜHRUNG GANZ BESTIMMTER KOMMANDOS
1291                   # MIT SSH, DESHALB AUFRUF PER PIPE
1292                print "[[ ! -d ${remote_ud} ]]  &&  (echo \"  *** ${remote_ud} will be created\"; mkdir -p  ${remote_ud}); [[ ! -d ${remote_ud}/../SCRIPTS ]]  &&  (echo \"  *** ${remote_ud}/../SCRIPTS will be created\"; mkdir -p  ${remote_ud}/../SCRIPTS)"  |  ssh ${remote_username}@${remote_addres}  2>&1
1293             fi
1294
1295                # KOPIEREN DER SCRIPTE
1296             if [[ $local_host = decalpha ]]
1297             then
1298                   # DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
1299                   # IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1300                   # KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1301                remote_ud=`echo $remote_ud | sed 's/\$HOME\///'`
1302                /bin/scp  batch_scp mbuild mrun subjob  ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS  >  /dev/null
1303             else
1304                scp  batch_scp mbuild mrun subjob  ${remote_username}@${remote_addres}:${remote_ud}/../SCRIPTS  >  /dev/null
1305             fi
1306
1307             cd  -  > /dev/null
1308             cd  ${local_source_path}/../UTIL
1309
1310
1311                # KOPIEREN DER UTILITY-PROGRAMME
1312             if [[ $local_host = decalpha ]]
1313             then
1314                   # DECALPHA BENUTZT BEI NICHTANGABE DES VOLLSTÄNDIGEN PFADES
1315                   # IRGENDEIN ANDERES SCP (WAS NICHT FUNKTIONIERT). AUSSERDEM
1316                   # KOENNEN DOLLAR-ZEICHEN NICHT BENUTZT WERDEN
1317                remote_ud=`echo $remote_ud | sed 's/\$HOME\///'`
1318                /bin/scp  Makefile  *.f90  ${remote_username}@${remote_addres}:${remote_ud}  >  /dev/null
1319             else
1320                scp  Makefile  *.f90  ${remote_username}@${remote_addres}:${remote_ud}  >  /dev/null
1321             fi
1322
1323
1324
1325                # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF REMOTE RECHNER AUSFUEHREN
1326                # KOMMANDOUEBERGABE AN SSH PER PIPE, DA SO DIE SYSTEM- UND
1327                # BENUTZERPROFILE VOLLSTAENDIG AUSGEFUEHRT WERDEN (SONST FEHLEN MAKE
1328                # Z.B. DIE PFADE ZUM COMPILER)
1329             echo "  *** execute \"make\" on remote host"
1330
1331             if [[ $remote_host = nech ]]
1332             then
1333                make_call_string="sxmake  F90=$compiler_name  F90_SER=$compiler_name_ser  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
1334             else
1335                make_call_string="make  F90=$compiler_name  F90_SER=$compiler_name_ser  COPT=\"$cpp_options\"  F90FLAGS=\"$compiler_options\"  LDFLAGS=\"$loader_options\" "
1336             fi
1337
1338             if [[ $remote_host = ibms  ||  $remote_host = ibmy ]]
1339             then
1340
1341                ssh  ${remote_username}@${remote_addres}  "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR"
1342
1343             elif [[ $remote_host = ibmb  ||  $remote_host = ibmh ]]
1344             then
1345
1346                print "export OBJECT_MODE=64; cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres}
1347
1348             elif [[ $remote_host = lctit ]]
1349             then
1350
1351                echo  " "  >  ${remote_host}_last_make_protokoll
1352                while [[ $(cat ${remote_host}_last_make_protokoll | grep -c "Forwarding to N1GE") = 0 ]]
1353                do
1354                   print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1355                done
1356
1357             else
1358
1359                print "cd ${remote_ud}; $make_call_string; [[ \$? != 0 ]] && echo MAKE_ERROR" | ssh  ${remote_username}@${remote_addres} 2>&1 | tee ${remote_host}_last_make_protokoll
1360
1361             fi
1362
1363          fi    # ENDE UEBERSETZUNG DER UTILITY-PROGRAMME
1364
1365
1366             # NUR AUF EINEM HLRN-RECHNER UEBERSETZEN
1367          [[ $remote_host = ibmb  ||  $remote_host = ibmh ]]  &&  ibm_hb_done=true
1368
1369       else
1370
1371          if [[ $compile_utility_programs = false ]]
1372          then
1373
1374                # MAKE MIT ZUVOR ERMITTELTEN OPTIONEN AUF LOKALEM RECHNER AUSFUEHREN
1375             echo " "
1376             echo "  *** execute \"make\" on local host"
1377
1378             make  PROG=$mainprog  F90=$compiler_name  COPT="$cpp_options"  F90FLAGS="$compiler_options"  LDFLAGS="$loader_options"  2>&1 | tee ${remote_host}_last_make_protokoll
1379
1380             if [[ $? != 0 ]]
1381             then
1382                printf "\a\n  +++ error(s) occurred during compiling or linking on host \"$remote_host\" "
1383                if [[ $silent = false ]]
1384                then
1385                   answer=dummy
1386                   printf "\n"
1387                   while [[ "$answer" != c  &&  "$answer" != k ]]
1388                   do
1389                      printf "  >>> continue / list errors / kill mbuild (c/l/k) ? "
1390                      read  answer
1391                      if [[ "$answer" = l ]]
1392                      then
1393                         more ${remote_host}_last_make_protokoll
1394                      fi
1395                   done
1396                   if [[ $answer = k ]]
1397                   then
1398                      locat=user_abort; exit
1399                   fi
1400                fi
1401             fi
1402
1403
1404                # NEUE VERSION AUF LOKALEM RECHNER ZUSAMMENPACKEN
1405             printf "\n  *** tar update on local host ..."
1406             tar -cf  ${mainprog}_current_version.tar  *.$suf *.o *.mod
1407
1408
1409             # COMPILE THE UTILITY PROGRAMS
1410          elif [[ $compile_utility_programs = true ]]
1411          then
1412             printf "\n\n"
1413             echo "  *** compiling the utility programs ..."
1414             cd ${local_source_path}/../UTIL
1415             make  F90=$compiler_name  F90_SER=$compiler_name_ser  COPT="$cpp_options"  F90FLAGS="$compiler_options"  LDFLAGS="$loader_options"
1416             cd  -  > /dev/null
1417          fi
1418
1419
1420             # NUR EINMAL AUF LCMUK UEBERSETZEN
1421          [[ $remote_host = lcmuk ]]  &&  lcmuk_done=true
1422
1423       fi
1424
1425    fi
1426 done
1427
1428
1429 if [[ $host_found = false ]]
1430 then
1431    if [[ $host = all ]]
1432    then
1433       printf "\n  +++ no hosts found in configuration file"
1434    else
1435       printf "\n  +++ host \"$host\" not found in configuration file"
1436    fi
1437    locat=config_file; exit
1438 fi
1439
1440
1441
1442    # ABSCHLIESSENDE ARBEITEN
1443 rm -f  hosts_found_in_config_file
1444
Note: See TracBrowser for help on using the repository browser.