== PALM error messages ==
In the following list the error messages reported by PALM are displayed. Each error message is identified by a unique message identifier which is composed of two letters and a number. The second column contains the error message which is reported in the job protocol (see [[../jobcontrol|here]]). In addition, the third column includes further explanations of the error.
{{{#!table style="border:none"
{{{#!td style="vertical-align:top;border:none;width:70px"
[#PA0001 PA****]
}}}
{{{#!td style="vertical-align:top;border:none"
Identifier for messages in the PALM standard code
}}}
|----------------
{{{#!td style="vertical-align:top;border:none"
[#UI0001 UI****]
}}}
{{{#!td style="vertical-align:top;border:none"
Identifier for messages in !''user_!'' routines 
}}}
|----------------
{{{#!td style="vertical-align:top;border:none"
[#NC NC****]
}}}
{{{#!td style="vertical-align:top;border:none"
Identifier for messages from the netCDF library
}}}
}}}
||='''Message identifier '''  =||='''Error message'''  =||='''Explanation'''  =||
||[=#PA0001 PA0001]   ||"host" is not set. Please check that environment variable "localhost" is set before running PALM  ||  ||
||[=#PA0002 PA0002]   ||illegal coupling mode: ...   ||  ||
||[=#PA0003 PA0003]   ||dt_coupling is not set but required for coupling mode "..."   ||  ||
||[=#PA0004 PA0004]   ||coupling mode "...": dt_coupling = ... is not equal to dt_coupling_remote = ...   ||  ||
||[=#PA0005 PA0005]   ||coupling mode "...": dt_coupling <= 0.0 is not allowed and is reset to MAX(dt_max(A,O)) = ...   ||  ||
||[=#PA0006 PA0006]   ||coupling mode "...": restart_time = ... is not equal to restart_time_remote = ... 	  ||  ||
||[=#PA0007 PA0007]   ||coupling mode "...": dt_restart = ... is not equal to dt_restart_remote = ...   ||  ||
||[=#PA0008 PA0008]   ||coupling mode "...": simulation_time_since_reference = ... is not equal to simulation_time_since_reference_remote = ...   ||  ||
||[=#PA0009 PA0009]   ||coupling mode "...": dx = ... is not equal to dx_remote = ...   ||  ||
||[=#PA0010 PA0010]   ||coupling mode "...": dy = ... is not equal to dy_remote = ...   ||  ||
||[=#PA0011 PA0011]   ||coupling mode "...": nx = ... is not equal to nx_remote = ...   ||  ||
||[=#PA0012 PA0012]   ||coupling mode "...": ny = ... is not equal to ny_remote = ...   ||  ||
||[=#PA0013 PA0013]   ||illegal value given for loop_optimization: "..."   ||  ||
||[=#PA0014 PA0014]   ||a non-flat topography does not allow ...   ||  ||
||[=#PA0015 PA0015]   ||ocean = .T. does not allow ...   ||  ||
||[=#PA0016 PA0016]   ||unknown solver for perturbation pressure: psolver = "..."   ||  ||
||[=#PA0017 PA0017]   ||psolver = "..." only works for a 1d domain-decomposition along x please do not set npey/=1 in the parameter file   ||  ||
||[=#PA0017 PA0018]   ||psolver = ".." does not work for subdomains with unequal size please set grid_matching = ''strict'' in the parameter file  ||  ||
||[=#PA0019 PA0019]   ||psolver = "..." only works for a parallel environment   ||  ||
||[=#PA0020 PA0020]   ||unknown multigrid cycle: cycle_mg = "..."   ||  ||
||[=#PA0021 PA0021]   ||unknown fft-algorithm: fft_method = "..."   ||  ||
||[=#PA0022 PA0022]   ||unknown advection scheme: momentum_advec = "..."   ||  ||
||[=#PA0023 PA0023]   ||momentum_advec = "..." is not allowed with timestep_scheme = "..."   ||  ||
||[=#PA0024 PA0024]   ||unknown advection scheme: scalar_advec = "..."   ||  ||
||[=#PA0025 PA0025]   ||use_upstream_for_tke set .TRUE. because use_sgs_for_particles = .TRUE. 	  ||  ||
||[=#PA0026 PA0026]   ||use_upstream_for_tke = .TRUE. not allowed with timestep_scheme = "..."   ||  ||
||[=#PA0027 PA0027]   ||unknown timestep scheme: timestep_scheme = "..."   ||  ||
||[=#PA0028 PA0028]   ||scalar advection scheme "..." does not work with timestep_scheme "..."   ||  ||
||[=#PA0029 PA0029]   ||momentum advection scheme "..." does not work with timestep_scheme "..."   ||  ||
||[=#PA0030 PA0030]   ||initializing_action = "..." unkown or not allowed   ||  ||
||[=#PA0031 PA0031]   ||initializing_actions = "set_constant_profiles" and "set_1d-model_profiles" are not allowed simultaneously   ||  ||
||[=#PA0032 PA0032]   ||initializing_actions = "set_constant_profiles" and "by_user" are not allowed simultaneously   ||  ||
||[=#PA0033 PA0033]   ||initializing_actions = "by_user" and "set_1d-model_profiles" are not allowed simultaneously   ||  ||
||[=#PA0034 PA0034]   ||cloud_physics = ... is not allowed with humidity = ...   ||  ||
||[=#PA0035 PA0035]   ||precipitation = ... is not allowed with cloud_physics = ...   ||  ||
||[=#PA0036 PA0036]   ||humidity = .TRUE. and sloping_surface = .TRUE. are not allowed simultaneously 	  ||  ||
||[=#PA0037 PA0037]   ||UPS-scheme is not implemented for humidity = .TRUE.   ||  ||
||[=#PA0038 PA0038]   ||humidity = .TRUE. and passive_scalar = .TRUE. is not allowed simultaneously' 	  ||  ||
||[=#PA0039 PA0039]   ||UPS-scheme is not implemented for passive_scalar = .TRUE.   ||  ||
||[=#PA0040 PA0040]   ||illegal value "..." found for parameter grid_matching   ||  ||
||[=#PA0041 PA0041]   ||plant_canopy = .TRUE. requires a non-zero drag coefficient given value is drag_coefficient = 0.0   ||  ||
||[=#PA0042 PA0042]   ||use_top_fluxes must be .TRUE. in ocean version   ||  ||
||[=#PA0043 PA0043]   ||ABS( alpha_surface = ... ) must be< 90.0   ||  ||
||[=#PA0044 PA0044]   ||dt = ... <= 0.0   ||  ||
||[=#PA0045 PA0045]   ||cfl_factor = ... out of range 0.0 < cfl_factor <= 1.0 is required   ||  ||
||[=#PA0046 PA0046]   ||baroclinicity (ug) not allowed simultaneously with galilei transformation   ||  ||
||[=#PA0047 PA0047]   ||baroclinicity (vg) not allowed simultaneously with galilei transformation  ||  ||
||[=#PA0048 PA0048]   ||variable translation speed used for galilei-transformation, which may cause instabilities in stably stratified regions   ||  ||
||[=#PA0049 PA0049]   ||unknown boundary condition: bc_lr = "..."   ||  ||
||[=#PA0050 PA0050]   ||unknown boundary condition: bc_ns = "..."   ||  ||
||[=#PA0051 PA0051]   ||non-cyclic lateral boundaries do not allow psolver = "..."   ||  ||
||[=#PA0052 PA0052]   ||non-cyclic lateral boundaries do not allow momentum_advec = "..."   ||  ||
||[=#PA0053 PA0053]   ||non-cyclic lateral boundaries do not allow scalar_advec = "..."   ||  ||
||[=#PA0054 PA0054]   ||non-cyclic lateral boundaries do not allow galilei_transformation = .T.   ||  ||
||[=#PA0055 PA0055]   ||adjust_mixing_length = TRUE and bc_e_b = "neumann"   ||  ||
||[=#PA0056 PA0056]   ||adjust_mixing_length = FALSE and bc_e_b = "..."   ||  ||
||[=#PA0057 PA0057]   ||boundary condition bc_e_b changed to "..."   ||  ||
||[=#PA0058 PA0058]   ||unknown boundary condition: bc_e_b = "..."   ||  ||
||[=#PA0059 PA0059]   ||unknown boundary condition: bc_p_b = "..."   ||  ||
||[=#PA0060 PA0060]   ||boundary condition: bc_p_b = "..." not allowed with prandtl_layer = .FALSE.  ||  ||
||[=#PA0061 PA0061]   ||unknown boundary condition: bc_p_t = "..."   ||  ||
||[=#PA0062 PA0062]   ||unknown boundary condition: bc_pt_b = "..."   ||  ||
||[=#PA0063 PA0063]   ||unknown boundary condition: bc_pt_t = "..."   ||  ||
||[=#PA0064 PA0064]   ||both, top_momentumflux_u AND top_momentumflux_v must be set   ||  ||
||[=#PA0065 PA0065]   ||boundary_condition: bc_pt_b = "..." is not allowed with constant_heatflux = .TRUE.   ||  ||
||[=#PA0066 PA0066]   ||constant_heatflux = .TRUE. is not allowed with pt_surface_initial_change (/=0) = ...   ||  ||
||[=#PA0067 PA0067]   ||boundary_condition: bc_pt_t = "..." is not allowed with constant_top_heatflux = .TRUE.  ||  ||
||[=#PA0068 PA0068]   ||unknown boundary condition: bc_sa_t = "..."   ||  ||
||[=#PA0069 PA0069]   ||boundary condition: bc_sa_t = "..." requires to set top_salinityflux   ||  ||
||[=#PA0070 PA0070]   ||boundary condition: bc_sa_t = "..." is not allowed with constant_top_salinityflux = .TRUE.'   ||  ||
||[=#PA0071 PA0071]   ||unknown boundary condition: bc_..._b ="..."   ||  ||
||[=#PA0072 PA0072]   ||unknown boundary condition: bc_..._t ="..."   ||  ||
||[=#PA0073 PA0073]   ||boundary condition: bc_..._b = "..." is not allowed with prescribed surface flux       ||  ||
||[=#PA0074 PA0074]   ||a prescribed surface flux is not allowed with ..._surface_initial_change (/=0) = ...   ||  ||
||[=#PA0075 PA0075]   ||boundary condition: bc_uv_b = "..." is not allowed with prandtl_layer = .TRUE.       ||  ||
||[=#PA0076 PA0076]   ||unknown boundary condition: bc_uv_b = "..."   ||  ||
||[=#PA0077 PA0077]   ||unknown boundary condition: bc_uv_t = "..."   ||  ||
||[=#PA0078 PA0078]   ||rayleigh_damping_factor = ... out of range [0.0,1.0]   ||  ||
||[=#PA0079 PA0079]   ||rayleigh_damping_height = ... out of range [0.0, ...]   ||  ||
||[=#PA0080 PA0080]   ||overshoot_limit_... < 0.0 is not allowed   ||  ||
||[=#PA0081 PA0081]   ||ups_limit_... < 0.0 is not allowed   ||  ||
||[=#PA0082 PA0082]   ||number of statistic_regions = ... but only 10 regions are allowed   ||  ||
||[=#PA0083 PA0083]   ||normalizing_region = ... must be >= 0 and <= ... (value of statistic_regions)       ||  ||
||[=#PA0084 PA0084]   ||dt_sort_particles is reset to 0.0 because of cloud_droplets = .TRUE.   ||  ||
||[=#PA0085 PA0085]   ||averaging_interval = ... must be <= dt_data_output = ...   ||  ||
||[=#PA0086 PA0086]   ||averaging_interval_pr = ... must be <= dt_dopr = ...   ||  ||
||[=#PA0087 PA0087]   ||averaging_interval_sp = ... must be <= dt_dosp = ...   ||  ||
||[=#PA0088 PA0088]   ||dt_averaging_input = ... must be <= averaging_interval = ...   ||  ||
||[=#PA0089 PA0089]   ||dt_averaging_input_pr = ... must be <= averaging_interval_pr = ...   ||  ||
||[=#PA0090 PA0090]   ||precipitation_amount_interval = ... must not be larger than dt_do2d_xy = ...       ||  ||
||[=#PA0091 PA0091]   ||data_output_pr = ... is not implemented for ocean = .FALSE.  ||  ||
||[=#PA0092 PA0092]   ||data_output_pr = ... is not implemented for humidity = .FALSE.   ||  ||
||[=#PA0093 PA0093]   ||data_output_pr = ... is not implemented for passive_scalar = .FALSE.  ||  ||
||[=#PA0094 PA0094]   ||data_output_pr = ... is not implemented for cloud_physics = .FALSE.  ||  ||
||[=#PA0095 PA0095]   ||data_output_pr = ... is not implemented for cloud_physics = .FALSE. and humidity = .FALSE.   ||  ||
||[=#PA0096 PA0096]   ||data_output_pr = ... is not implemented for cloud_physics = .FALSE. or cloud_droplets = .FALSE   ||  ||
||[=#PA0097 PA0097]   ||illegal value for data_output_pr or data_output_pr_user = "..."   ||  ||
||[=#PA0098 PA0098]   ||illegal value for data_output_pr = "..."   ||  ||
||[=#PA0100 PA0100]   ||unknown normalization method cross_normalized_x = "..."   ||  ||
||[=#PA0101 PA0101]   ||unknown normalization method cross_normalized_y = "..."   ||  ||
||[=#PA0102 PA0102]   ||number of output quantities given by data_output and data_output_user exceeds the limit of 100   ||  ||
||[=#PA0103 PA0103]   ||output of "..." requires constant_diffusion = .FALSE.   ||  ||
||[=#PA0104 PA0104]   ||output of "..." requires a "particles_par"-NAMELIST in the parameter file (PARIN)   ||  ||
||[=#PA0105 PA0105]   ||output of "..." requires humidity = .TRUE.   ||  ||
||[=#PA0106 PA0106]   ||output of "..." requires cloud_physics = .TRUE. or cloud_droplets = .TRUE.  ||  ||
||[=#PA0107 PA0107]   ||output of "..." requires cloud_droplets = .TRUE.   ||  ||
||[=#PA0108 PA0108]   ||output of "..." requires cloud_physics = .TRUE.   ||  ||
||[=#PA0109 PA0109]   ||output of "..." requires ocean = .TRUE.   ||  ||
||[=#PA0110 PA0110]   ||output of "..." requires passive_scalar = .TRUE.   ||  ||
||[=#PA0111 PA0111]   ||illegal value for data_output: "..." only 2d-horizontal cross sections are allowed for this value   ||  ||
||[=#PA0112 PA0112]   ||output of "..." requires precipitation = .TRUE.   ||  ||
||[=#PA0113 PA0113]   ||temporal averaging of precipitation amount "..." is not possible  ||  ||
||[=#PA0114 PA0114]   ||illegal value for data_output or data_output_user = "..."   ||  ||
||[=#PA0115 PA0115]   ||illegal value for data_output = "..."   ||  ||
||[=#PA0117 PA0117]   ||do3d_compress = .TRUE. not allowed on host "..."   ||  ||
||[=#PA0118 PA0118]   ||illegal precision: do3d_comp_prec ( ...) = "..."   ||  ||
||[=#PA0119 PA0119]   ||unknown variable "..." given for do3d_comp_prec(...)   ||  ||
||[=#PA0129 PA0120]   ||unknown value for data_output_format "..."   ||  ||
||[=#PA0121 PA0121]   ||km_constant = ... < 0.0   ||  ||
||[=#PA0122 PA0122]   ||prandtl_number = ... < 0.0   ||  ||
||[=#PA0123 PA0123]   ||prandtl_layer is not allowed with fixed value of km   ||  ||
||[=#PA0124 PA0124]   ||outflow_damping width out of range   ||  ||
||[=#PA0125 PA0125]   ||rif_min = ... must be less than rif_max = ...   ||  ||
||[=#PA0126 PA0126]   ||disturbance_level_b = ... must be >= ... (zu(3))    ||  ||
||[=#PA0127 PA0127]   ||disturbance_level_b = ... must be <= ... (zu(nzt-2))    ||  ||
||[=#PA0128 PA0128]   ||disturbance_level_t = ... must be <= ... (zu(nzt-2))    ||  ||
||[=#PA0129 PA0129]   ||disturbance_level_t = ... must be >= disturbance_level_b = ...    ||  ||
||[=#PA0130 PA0130]   ||disturbance_level_ind_t =... must be >= disturbance_level_b = ...    ||  ||
||[=#PA0131 PA0131]   ||inflow_disturbance_begin out of range    ||  ||
||[=#PA0132 PA0132]   ||inflow_disturbance_end out of range    ||  ||
||[=#PA0133 PA0133]   ||turbulent_inflow = .T. requires a Dirichlet condition at the inflow boundary      ||  ||
||[=#PA0134 PA0134]   ||illegal value for recycling_width: ...    ||  ||
||[=#PA0135 PA0135]   ||unknown random generator: random_generator = "..."   ||  ||
||[=#PA0136 PA0136]   ||damp_level_1d = ... must be > 0.0 and < ... (zu(nzt+1))   ||  ||
||[=#PA0137 PA0137]   ||mixing_length_1d = "..." is unknown   ||  ||
||[=#PA0138 PA0138]   ||dissipation_1d = "..." is unknown   ||  ||
||[=#PA0139 PA0139]   ||termination_time_needed = ... must be > 30.0 on host ...   ||  ||
||[=#PA0140 PA0140]   ||termination_time_needed = ... should be >= 300.0 on host "..."   ||  ||
||[=#PA0141 PA0141]   ||coupling requires PALM to be called with "mrun -K parallel"   ||  ||
||[=#PA0142 PA0142]   ||absolute temperature < 0.0 at zu(...) = ...   ||  ||
||[=#PA0143 PA0143]   ||k=... j=... i=... ql_c=... part(...)%wf=... delta_r=...   ||  ||
||[=#PA0144 PA0144]   ||!#1 k=... j=... i=... e_s=... e_a=... t_int=... d_radius=... delta_r=... particle_radius=...   ||  ||
||[=#PA0145 PA0145]   ||collision_efficiency out of range: ...   ||  ||
||[=#PA0146 PA0146]  ||maximum_number_of_particles needs to be increased but this is not allowed with netcdf_data_format < 3  ||netCDF output is switched on ([../d3par#data_output_format data_output_format] = '' 'netcdf' '') and a netCDF3 format is used ([../d3par#netcdf_data_format  netcdf_data_format ] < 3). \\\\ If output of particle data is switched on (see [../d3par#dt_write_particle_data dt_write_particle_data]), the size of the particle array, given on each processor by [../d3par#maximum_number_of_particles maximum_number_of_particles], is not allowed to increase during the run, when the netCDF3 data format is used, because netCDF3 allows only one unlimited dimension, which is the time dimension. Anyhow, PALM tries to increase the size of the particle array, if the number of particles in a subdomain becomes larger than the size of this array. This may happen because of a flow convergence or because new sets of particles are released (see [../d3par#dt_prel dt_prel]).\\\\This problem can be avoided by using the netCDF4 data format ([../d3par#netcdf_data_format netcdf_data_format] > 2), which allows more than one unlimited dimension.\\\\Alternatively, [../d3par#maximum_number_of_particles maximum_number_of_particles] can be given a sufficiently large value.  ||
||[=#PA0147 PA0145]PA0147   ||maximum_number_of_tails needs to be increased but this is not allowed with netcdf_data_format < 3   ||netCDF output is switched on ([../d3par#data_output_format data_output_format] = '' 'netcdf' '') and a netCDF3 format is used ([../d3par#netcdf_data_format  netcdf_data_format ] < 3). \\\\ If output of particle data is switched on (see [../d3par#dt_write_particle_data dt_write_particle_data]), the size of the particle array, given on each processor by [../d3par#maximum_number_of_tails maximum_number_of_tails], is not allowed to increase during the run, when the netCDF3 data format is used, because netCDF3 allows only one unlimited dimension, which is the time dimension. Anyhow, PALM tries to increase the size of the particle array, if the number of particles in a subdomain becomes larger than the size of this array. This may happen because of a flow convergence or because new sets of particles are released (see [../d3par#dt_prel dt_prel]).\\\\This problem can be avoided by using the netCDF4 data format ([../d3par#netcdf_data_format netcdf_data_format] > 2), which allows more than one unlimited dimension.\\\\Alternatively, [../d3par#maximum_number_of_particles maximum_number_of_particles] can be given a sufficiently large value.  ||
||[=#PA0148 PA0148]   ||particle too fast. n = ...   ||  ||
||[=#PA0149 PA0149]   ||particle out of range: i=... j=... k=... nxl=... nxr=... nys=... nyn=... nzb=... nzt=...     ||  ||
||[=#PA0150 PA0150]   ||Both dp_external and conserve_volume_flow are .TRUE. but one of them must be .FALSE.   ||  ||
||[=#PA0151 PA0151]   ||dp_level_b = ... is out of range   ||  ||
||[=#PA0152 PA0152]   ||dp_external is .TRUE. but dpdxy is zero, i.e. the external pressure gradient will not be applied   ||  ||
||[=#PA0153 PA0153]   ||dpdxy is nonzero but dp_external is .FALSE., i.e. the external pressure gradient will not be applied   ||  ||
||[=#PA0154 PA0154]   ||unknown conserve_volume_flow_mode: ...   ||  ||
||[=#PA0155 PA0155]   ||noncyclic boundary conditions require conserve_volume_flow_mode = "inflow_profile"   ||  ||
||[=#PA0156 PA0156]   ||noncyclic boundary conditions require conserve_volume_flow_mode = "inflow_profile"   ||  ||
||[=#PA0157 PA0157]   ||nonzero bulk velocity requires conserve_volume_flow = .T. and conserve_volume_flow_mode = "bulk_velocity"   ||  ||
||[=#PA0158 PA0158]   ||no vertical boundary condition for variable "..."   ||  ||
||[=#PA0159 PA0159]   ||no term for component "..."   ||  ||
||[=#PA0160 PA0160]   ||non-cyclic lateral boundaries along x do not allow calculation of spectra along x       ||  ||
||[=#PA0161 PA0161]   ||sorry, calculation of spectra in non parallel mode is still not realized       ||  ||
||[=#PA0162 PA0162]   ||non-cyclic lateral boundaries along y do not allow calculation of spectra along y       ||  ||
||[=#PA0163 PA0163]   ||run will be terminated because it is running out of job cpu limit remaining time: ... s termination time needed: ... s   ||  ||
||[=#PA0164 PA0164]   ||run will be terminated due to user settings of restart_time / dt_restart new restart time is: ... s   ||  ||
||[=#PA0165 PA0165]   ||re-open of unit 14 is not verified. Please check results!   ||  ||
||[=#PA0166 PA0166]   ||re-opening of file-id ... is not allowed   ||  ||
||[=#PA0167 PA0167]   ||opening file-id ... not allowed for PE ...   ||  ||
||[=#PA0168 PA0168]   ||opening file-id ... is not allowed since it is used otherwise   ||  ||
||[=#PA0169 PA0169]   ||no filename for AVS-data-file found in MRUN-config-file filename in FLD-file set to "unknown"   ||  ||
||[=#PA0170 PA0170]   ||no path for batch_scp on host "..."   ||  ||
||[=#PA0171 PA0171]   ||NetCDF: NetCDF4 format requested but no cpp-directive !__netcdf4 given switch back to 64-bit offset format  ||[../d3par#netcdf_data_format  netcdf_data_format ] > 2 has been set. This requires netCDF4 features, which have to be activated by setting the cpp-directive {{{__netcdf4}}} in the configuration file ({{{%cpp_options}}}). It also requires a netCDF4 library. Set {{{-I}}}, {{{-L}}} and {{{-l}}} options in compile ({{{%copts}}}) and load ({{{%lopts}}}) options of the configuration file appropriately.  ||
||[=#PA0172 PA0172]   ||no OPEN-statement for file-id ...   ||  ||
||[=#PA0173 PA0173]   ||wrong component: ...   ||  ||
||[=#PA0174 PA0174]   ||wrong argument expected: ... given:   ||  ||
||[=#PA0175 PA0175]   ||no time measurement defined on this host   ||  ||
||[=#PA0176 PA0176]   ||negative time interval occured PE ... L=PAUSE "..." new=... last=...   ||  ||
||[=#PA0177 PA0177]   ||negative time interval occured PE ... L=STOP "..." new=... last=... isum=...   ||  ||
||[=#PA0178 PA0178]   ||negative time interval occured PE ... L=STOP "..." sum=... mtime=...   ||  ||
||[=#PA0179 PA0179]   ||unknown modus of time measurement: ...   ||  ||
||[=#PA0180 PA0180]   ||unknown cross-section: ...   ||  ||
||[=#PA0181 PA0181]   ||no output provided for: ...   ||  ||
||[=#PA0182 PA0182]   ||if humidity/passive_scalar = FALSE output of ... is not provided   ||  ||
||[=#PA0183 PA0183]   ||if cloud_physics = FALSE output of ... is not provided   ||  ||
||[=#PA0184 PA0184]   ||if cloud_physics = FALSE output of ... is not provided   ||  ||
||[=#PA0185 PA0185]   ||data_output_profiles: normalizing cross ... is not possible since one of the normalizing factors is zero! cross_normx_factor(...,...) = ... cross_normy_factor(...,...) = ...   ||  ||
||[=#PA0186 PA0186]   ||no spectra data available   ||  ||
||[=#PA0187 PA0187]   ||fft method "..." currently does not work on NEC   ||  ||
||[=#PA0188 PA0188]   ||no system-specific fft-call available  ||  ||
||[=#PA0189 PA0189]   ||fft method "..." not available   ||  ||
||[=#PA0190 PA0190]   ||flow_statistics is called two times within one timestep   ||  ||
||[=#PA0191 PA0191]   ||unknown action(s): ...   ||  ||
||[=#PA0192 PA0192]   ||timestep has exceeded the lower limit dt_1d = ... s simulation stopped!   ||  ||
||[=#PA0193 PA0193]   ||unknown initializing problem   ||  ||
||[=#PA0194 PA0194]   ||number of time series quantities exceeds its maximum of dots_max = ... Please increase dots_max in modules.f90.   ||  ||
||[=#PA0195 PA0195]   ||dvrp_username is undefined   ||  ||
||[=#PA0196 PA0196]   ||dvrp_output="..." not allowed   ||  ||
||[=#PA0197 PA0197]   ||dvrp_file="..." not allowed   ||  ||
||[=#PA0198 PA0198]   ||mode_dvrp="..." not allowed   ||  ||
||[=#PA0199 PA0199]   ||split of communicator not realized with MPI1 coupling atmosphere-ocean'   ||  ||
||[=#PA0200 PA0200]   ||missing dz   ||  ||
||[=#PA0201 PA0201]   ||dz=... <= 0.0   ||  ||
||[=#PA0202 PA0202]   ||grid anisotropy exceeds threshold given by only local horizontal reduction of near_wall mixing length l_wall starting from height level k = ... .   ||  ||
||[=#PA0203 PA0203]   ||inconsistent building parameters: bxl=... bxr=... bys=... byn=... nx=... ny=...    ||  ||
||[=#PA0204 PA0204]   ||no street canyon width given   ||  ||
||[=#PA0205 PA0205]   ||inconsistent canyon parameters: cxl=... cxr=... cwx=... ch=... nx=... ny=...   ||  ||
||[=#PA0206 PA0206]   ||inconsistent canyon parameters:... cys=... cyn=... cwy=... ch=... nx=... ny=...  ||  ||
||[=#PA0207 PA0207]   ||inconsistent canyon parameters: street canyon can only be oriented either in x- or in y-direction   ||  ||
||[=#PA0208 PA0208]   ||file TOPOGRAPHY_DATA does not exist   ||  ||
||[=#PA0209 PA0209]   ||errors in file TOPOGRAPHY_DATA   ||  ||
||[=#PA0210 PA0210]   ||nzb_local values are outside the model domain MINVAL( nzb_local ) = ... MAXVAL( nzb_local ) = ...   ||  ||
||[=#PA0211 PA0211]   ||nzb_local does not fulfill cyclic boundary condition in x-direction   ||  ||
||[=#PA0212 PA0212]   ||nzb_local does not fulfill cyclic boundary condition in y-direction   ||  ||
||[=#PA0213 PA0213]   ||max_number_of_particle_groups =... number_of_particle_groups reset to ...   ||  ||
||[=#PA0214 PA0214]   ||version mismatch concerning data from prior run version on file = ... version in program = ...   ||  ||
||[=#PA0215 PA0215]   ||particle group !# ... has a density ratio /= 0 but radius = 0   ||  ||
||[=#PA0216 PA0216]   ||number of initial particles (...) exceeds maximum_number_of_particles (...) on PE ...   ||  ||
||[=#PA0217 PA0217]   ||unknown boundary condition bc_par_b = "..."   ||  ||
||[=#PA0218 PA0218]   ||unknown boundary condition bc_par_t = "..."   ||  ||
||[=#PA0219 PA0219]   ||unknown boundary condition bc_par_lr = "..."   ||  ||
||[=#PA0220 PA0219]   ||unknown boundary condition bc_par_ns = "..."   ||  ||
||[=#PA0221 PA0221]   ||number of PEs of the prescribed topology (...) does not match the number of PEs available to the job ()   ||  ||
||[=#PA0222 PA0222]   ||if the processor topology is prescribed by the user, both values of "npex" and "npey" must be given in the NAMELIST-parameter file   ||  ||
||[=#PA0223 PA0223]   ||psolver = "poisfft_hybrid" can only be used in case of a 1d-decomposition along x     ||  ||
||[=#PA0224 PA0224]   ||no matching grid for transpositions found   ||  ||
||[=#PA0225 PA0225]   ||x-direction: gridpoint number (...) is not an integral divisor of the number of procesors (...)   ||  ||
||[=#PA0226 PA0226]   ||x-direction: nx does not match the requirements given by the number of PEs used please use nx = ... instead of nx =...   ||  ||
||[=#PA0227 PA0227]   ||y-direction: gridpoint number (...) is not an integral divisor of the number of processors (...)   ||  ||
||[=#PA0228 PA0228]   ||y-direction: ny does not match the requirements given by the number of PEs used please use ny = ... instead of ny =...   ||  ||
||[=#PA0229 PA0229]   ||1d-decomposition along x chosen but nz restrictions may occur since ups-scheme is activated   ||  ||
||[=#PA0230 PA0230]   ||transposition z --> x: nz=... is not an integral divisior of pdims(1)= ...   ||  ||
||[=#PA0231 PA0231]   ||transposition x --> y: nx+1=... is not an integral divisor of pdims(2)= ...   ||  ||
||[=#PA0232 PA0232]   ||transposition y --> z: ny+1=... is not an integral divisor of pdims(1)=...    ||  ||
||[=#PA0233 PA0233]   ||transposition x --> y: ny+1=... is not an integral divisor of pdims(1)=...   ||  ||
||[=#PA0234 PA0234]   ||direct transposition z --> y (needed for spectra): nz=... is not an integral divisor of pdims(2)=...   ||  ||
||[=#PA0235 PA0235]   ||mg_switch_to_pe0_level out of range and reset to default (=0)   ||  ||
||[=#PA0236 PA0236]   ||not enough memory for storing gathered multigrid data on PE0   ||  ||
||[=#PA0237 PA0237]   ||multigrid gather/scatter impossible in non parallel mode   ||  ||
||[=#PA0238 PA0238]   ||more than 10 multigrid levels   ||  ||
||[=#PA0239 PA0239]   ||The value for "topography_grid_convention" is not set. Its default value is only valid for "topography" = "single_building", "single_street_canyon" or "read_from_file" Choose "cell_edge" or "cell_center".   ||  ||
||[=#PA0240 PA0240]   ||The value for "topography_grid_convention" is not recognized. Choose "cell_edge" or "cell_center".   ||  ||
||[=#PA0241 PA0241]   ||netcdf_precision must contain a "_" netcdf_precision(...)="..."  ||  ||
||[=#PA0242 PA0242]   ||illegal netcdf precision: netcdf_precision( ...)="..."   ||  ||
||[=#PA0243 PA0243]   ||unknown variable in inipar assignment: netcdf_precision(...)="..."   ||  ||
||[=#PA0244 PA0244]   ||no grid defined for variable ...   ||  ||
||[=#PA0245 PA0245]   ||NetCDF file for volume data ... from previous run found, but this file cannot be extended due to variable mismatch. New file is created instead.   ||  ||
||[=#PA0246 PA0246]   ||NetCDF file for volume data ... from previous run found, but this file cannot be extended due to mismatch in number of vertical grid points (nz_do3d). New file is created 47stead.   ||  ||
||[=#PA0247 PA0247]   ||NetCDF file for volume data ... from previous run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead.   ||  ||
||[=#PA0248 PA0248]   ||NetCDF file for volume data ... from previous run found. This file will be extended.   ||  ||
||[=#PA0249 PA0249]   ||NetCDF file for cross-sections ... from previous run found, but this file cannot be extended due to variable mismatch. New file is created instead.   ||  ||
||[=#PA0250 PA0250]   ||NetCDF file for cross-sections ... from previous run found, but this file cannot be extended due to mismatch in number of cross sections. New file is created instead.   ||  ||
||[=#PA0251 PA0251]   ||NetCDF file for cross-sections ... from previuos run found but this file cannot be extended due to mismatch in cross section levels. New file is created instead. ||  ||
||[=#PA0252 PA0252]   ||NetCDF file for cross sections ... from previous run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead.   ||  ||
||[=#PA0253 PA0253]   ||NetCDF file for cross-sections ... from previous run found. This file will be extended.   ||  ||
||[=#PA0254 PA0254]   ||NetCDF file for vertical profiles from previous run found, but this file cannot be extended due to variable mismatch. New file is created instead.   ||  ||
||[=#PA0255 PA0255]   ||NetCDF file for vertical profiles from previous run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead.   ||  ||
||[=#PA0256 PA0256]   ||NetCDF file for vertical profiles from previous run found. This file will be extended.   ||  ||
||[=#PA0257 PA0257]   ||NetCDF file for vertical profiles from previous run found. This file will be extended.   ||  ||
||[=#PA0258 PA0258]   ||NetCDF file for time series from previous run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead.   ||  ||
||[=#PA0259 PA0259]   ||NetCDF file for time series from previous run found. This file will be extended.    ||  ||
||[=#PA0260 PA0260]   ||NetCDF file for spectra from previuos run found, but this file cannot be extended due to variable mismatch. New file is created instead.   ||  ||
||[=#PA0261 PA0261]   ||NetCDF file for spectra from previuos run found, but this file cannot be extended due to mismatch in number of vertical levels. New file is created instead.   ||  ||
||[=#PA0262 PA0262]   ||NetCDF file for spectra from previuos run found, but this file cannot be extended due to mismatch in heights of vertical levels. New file is created instead.   ||  ||
||[=#PA0263 PA0263]   ||NetCDF file for spectra from previuos run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead.   ||  ||
||[=#PA0264 PA0264]   ||NetCDF file for spectra from previous run found. This file will be extended.    ||  ||
||[=#PA0265 PA0265]   ||NetCDF file for particles from previuos run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead.   ||  ||
||[=#PA0266 PA0266]   ||NetCDF file for particles from previous run found. This file will be extended.   ||  ||
||[=#PA0267 PA0267]   ||NetCDF file for particle time series from previuos run found, but this file cannot be extended due to variable mismatch. New file is created instead.   ||  ||
||[=#PA0268 PA0268]   ||NetCDF file for particle time series from previuos run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead.   ||  ||
||[=#PA0269 PA0269]   ||NetCDF file for particle time series from previous run found. This file will be extended.   ||  ||
||[=#PA0270 PA0270]   ||mode "..." not supported   ||  ||
||[=#PA0271 PA0271]   ||errors in $inipar or $inipar-namelist found (CRAY-machines only)   ||  ||
||[=#PA0272 PA0272]   ||no $inipar-namelist found   ||  ||
||[=#PA0273 PA0273]   ||no value or wrong value given for nx: nx=...   ||  ||
||[=#PA0274 PA0274]   ||no value or wrong value given for ny: ny=...   ||  ||
||[=#PA0275 PA0275]   ||no value or wrong value given for nz: nz=...   ||  ||
||[=#PA0276 PA0276]   ||local file ENVPAR not found some variables for steering may not be properly set   ||  ||
||[=#PA0277 PA0277]   ||errors in local file ENVPAR some variables for steering may not be properly set   ||  ||
||[=#PA0278 PA0278]   ||no envpar-NAMELIST found in local file ENVPAR some variables for steering may not be properly set   ||  ||
||[=#PA0279 PA0279]   ||wrong component: ...   ||  ||
||[=#PA0280 PA0280]   ||Number of OpenMP threads = ...   ||  ||
||[=#PA0281 PA0281]   ||running optimized multinode version switch_per_lpar = ... tasks_per_lpar = ... tasks_per_logical_node = ...   ||  ||
||[=#PA0282 PA0282]   ||parallel environment (MPI) required   ||  ||
||[=#PA0283 PA0283]   ||no sufficient convergence within 1000 cycles   ||  ||
||[=#PA0284 PA0284]   ||data from subdomain of previous run mapped more than 1000 times   ||  ||
||[=#PA0285 PA0285]   ||number of PEs or virtual PE-grid changed in restart run PE ... will read from files ...   ||  ||
||[=#PA0286 PA0286]   ||version mismatch concerning data from prior run version on file = "..." version in program = "..."   ||  ||
||[=#PA0287 PA0287]   ||problem with index bound nxl on restart file "..." nxl = ... but it should be = ... from the index bound information array   ||  ||
||[=#PA0288 PA0288]   ||problem with index bound nxr on restart file "..." nxr = ... but it should be = ... from the index bound information array   ||  ||
||[=#PA0289 PA0289]   ||problem with index bound nys on restart file "..." nys = ... but it should be = ... from the index bound information array   ||  ||
||[=#PA0290 PA0290]   ||problem with index bound nyn on restart file "..." nyn = ... but it should be = ... from the index bound information array   ||  ||
||[=#PA0291 PA0201]   ||mismatch between actual data and data from prior run on PE ... nzb on file = ... nzb = ...   ||  ||
||[=#PA0292 PA0292]   ||mismatch between actual data and data from prior run on PE ... nzt on file = ... nzt = ...   ||  ||
||[=#PA0293 PA0293]   ||read_3d_binary: spectrum_x on restart file ignored because total numbers of grid points (nx) do not match   ||  ||
||[=#PA0294 PA0294]   ||read_3d_binary: spectrum_y on restart file ignored because total numbers of grid points (ny) do not match   ||  ||
||[=#PA0295 PA0295]   ||unknown field named "..." found in data from prior run on PE ...   ||  ||
||[=#PA0296 PA0296]   ||version mismatch concerning control variables version on file = "..." version on program = "..."   ||  ||
||[=#PA0297 PA0297]   ||numprocs not found in data from prior run on PE ...   ||  ||
||[=#PA0298 PA0298]   ||hor_index_bounds not found in data from prior run on PE ...   ||  ||
||[=#PA0299 PA0299]   ||nz not found in data from prior run on PE ...   ||  ||
||[=#PA0300 PA0300]   ||max_pr_user not found in data from prior run on PE ...   ||  ||
||[=#PA0301 PA0301]   ||statistic_regions not found in data from prior run on PE ...   ||  ||
||[=#PA0302 PA0302]   ||unknown variable named "..." found in data from prior run on PE ...   ||  ||
||[=#PA0303 PA0303]   ||nz not found in restart data file   ||  ||
||[=#PA0304 PA0304]   ||mismatch concerning number of gridpoints along z nz on file = "..." nz from run = "..."   ||  ||
||[=#PA0305 PA0305]   ||max_pr_user not found in restart data file   ||  ||
||[=#PA0306 PA0306]   ||number of user profiles on restart data file differs from the current run max_pr_user on file = "..." max_pr_user from run = "..."   ||  ||
||[=#PA0307 PA0307]   ||statistic_regions not found in restart data file   ||  ||
||[=#PA0308 PA0308]   ||statistic regions on restart data file differ from the current run statistic regions on file = "..." statistic regions from run = "..." statistic data may be lost!  ||  ||
||[=#PA0309 PA0309]   ||inflow profiles not temporally averaged. Averaging will be done now using ... samples.   ||  ||
||[=#PA0310 PA0310]   ||remote model "..." terminated with terminate_coupled_remote = ... local model "..." has terminate_coupled = ...   ||  ||
||[=#PA0311 PA0311]   ||number of gridpoints along x or/and y contain illegal factors only factors 8,6,5,4,3,2 are allowed   ||  ||
||[=#PA0312 PA0312]   ||Time step has reached minimum limit. \\dt = ... s Simulation is terminated.\\old_dt = ... s\\dt_u = ... s\\dt_v = ... s\\dt_w = ... s\\dt_diff = ... s\\u_max = ... m/s k=... j=... i=...\\v_max = ... m/s k=... j=... i=...\w_max = ... m/s k=... j=... i=...   ||  ||
||[=#PA0313 PA0313]   ||illegal value for parameter particle_color: ...   ||  ||
||[=#PA0314 PA0314]   ||illegal value for parameter particle_dvrpsize: ...   ||  ||
||[=#PA0315 PA0315]   ||color_interval(2) <= color_interval(1)   ||  ||
||[=#PA0316 PA0316]   ||dvrpsize_interval(2) <= dvrpsize_interval(1)   ||  ||
||[=#PA0317 PA0317]   ||ocean = .F. does not allow coupling_char = ... set by mrun-option "-y"   ||  ||
||[=#PA0318 PA0318]   ||inflow_damping_height must be explicitly specified because the inversion height calculated by the prerun is zero   ||  ||
||[=#PA0319 PA0319]   ||section_xy must be <= nz + 1 = ...   ||  ||
||[=#PA0320 PA0320]   ||section_xz must be <= ny + 1 = ...   ||  ||
||[=#PA0321 PA0321]   ||section_yz must be <= nx + 1 = ...   ||  ||
||[=#PA0322 PA0322]   ||output of q*w*(0) requires humidity=.TRUE.  ||  ||
||[=#PA0323 PA0323]   ||output of averaged quantity "..." requires to set a non-zero averaging interval  ||  ||
||[=#PA0324 PA0324]   ||Applying large scale vertical motion is not allowed for ocean runs  ||  ||
||[=#UI0001 UI0001]   ||unknown location "..."   ||  ||
||[=#UI0002 UI0002]   ||location "..." is not allowed to be called with parameters "i" and "j"   ||  ||
||[=#UI0003 UI0003]   ||no output possible for: ...  ||
||[=#UI0004 UI0004]   ||unknown mode "..."   ||  ||
||[=#UI0005 UI0005]   ||topography "..." not available yet   ||  ||
||[=#UI0006 UI0006]   ||unknown topography "..."   ||  ||
||[=#UI0007 UI0007]   ||canopy_mode "..." not available yet   ||  ||
||[=#UI0008 UI0008]   ||unknown canopy_mode "..."   ||  ||
||[=#UI0009 UI0009]   ||the number of user-defined profiles given in data_output_pr (...) does not match the one found in the restart file (...)   ||  ||
||[=#UI0010 UI0010]   ||Spectra of ... can not be calculated   ||  ||
||[=#UI0011 UI0011]   ||Spectra of ... are not defined   ||  ||
||[=#UI0012 UI0012]   ||unknown variable named "..." found in data from prior run on PE   ||  ||
||[=#NC NC!**!**]   ||!**!** contains numbers in the range from 1-444   ||Internally, PALM calls the netCDF function {{{NF90_STRERROR}}} which returns an error message string provided by netCDF. Hence, no exact assignment between PALM error number and netCDF error string can be given.  ||