!> @file dynamics_mod.f90 !--------------------------------------------------------------------------------------------------! ! This file is part of the PALM model system. ! ! PALM is free software: you can redistribute it and/or modify it under the terms of the GNU General ! Public License as published by the Free Software Foundation, either version 3 of the License, or ! (at your option) any later version. ! ! PALM is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the ! implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General ! Public License for more details. ! ! You should have received a copy of the GNU General Public License along with PALM. If not, see ! . ! ! Copyright 1997-2021 Leibniz Universitaet Hannover !--------------------------------------------------------------------------------------------------! ! ! Current revisions: ! ----------------- ! ! ! Former revisions: ! ----------------- ! $Id: dynamics_mod.f90 4851 2021-01-22 09:25:05Z moh.hefny $ ! bugfix: deactivated header output ! ! 4845 2021-01-18 11:15:37Z raasch ! radiation boundary condition always uses maximum phase velocity, respective code for calculating ! the phase velocity is removed ! ! 4843 2021-01-15 15:22:11Z raasch ! local namelist parameter added to switch off the module although the respective module namelist ! appears in the namelist file ! ! 4842 2021-01-14 10:42:28Z raasch ! reading of namelist file and actions in case of namelist errors revised so that statement labels ! and goto statements are not required any more ! ! 4828 2021-01-05 11:21:41Z Giersch ! Enable 3D data output also with 64-bit precision ! ! 4760 2020-10-26 13:26:47Z schwenkel ! Implement relative humidity as diagnostic output quantity ! ! 4731 2020-10-07 13:25:11Z schwenkel ! Move exchange_horiz from time_integration to modules ! ! 4627 2020-07-26 10:14:44Z raasch ! bugfix for r4626 ! ! 4626 2020-07-26 09:49:48Z raasch ! file re-formatted to follow the PALM coding standard ! ! 4517 2020-05-03 14:29:30Z raasch ! added restart with MPI-IO for reading local arrays ! ! 4505 2020-04-20 15:37:15Z schwenkel ! Add flag for saturation check ! ! 4495 2020-04-13 20:11:20Z resler ! restart data handling with MPI-IO added ! ! 4360 2020-01-07 11:25:50Z suehring ! Bugfix for last commit. ! ! 4359 2019-12-30 13:36:50Z suehring ! Refine post-initialization check for realistically inital values of mixing ratio. Give an error ! message for faulty initial values, but only a warning in a restart run. ! ! 4347 2019-12-18 13:18:33Z suehring ! Implement post-initialization check for realistically inital values of mixing ratio ! ! 4281 2019-10-29 15:15:39Z schwenkel ! Moved boundary conditions in dynamics module ! ! 4097 2019-07-15 11:59:11Z suehring ! Avoid overlong lines - limit is 132 characters per line ! ! 4047 2019-06-21 18:58:09Z knoop ! Initial introduction of the dynamics module with only dynamics_swap_timelevel implemented ! ! ! Description: ! ------------ !> This module contains the dynamics of PALM. !--------------------------------------------------------------------------------------------------! MODULE dynamics_mod USE arrays_3d, & ONLY: diss, & diss_p, & dzu, & e, & e_p, & exner, & hyp, & pt, pt_1, pt_2, pt_init, pt_p, & q, q_1, q_2, q_p, & s, s_1, s_2, s_p, & u, u_1, u_2, u_init, u_p, & v, v_1, v_2, v_p, v_init, & w, w_1, w_2, w_p, & zu USE basic_constants_and_equations_mod, & ONLY: magnus, & rd_d_rv USE control_parameters, & ONLY: bc_dirichlet_l, & bc_dirichlet_s, & bc_radiation_l, & bc_radiation_n, & bc_radiation_r, & bc_radiation_s, & bc_pt_t_val, & bc_q_t_val, & bc_s_t_val, & check_realistic_q, & child_domain, & coupling_mode, & constant_diffusion, & dt_3d, & humidity, & ibc_pt_b, & ibc_pt_t, & ibc_q_b, & ibc_q_t, & ibc_s_b, & ibc_s_t, & ibc_uv_b, & ibc_uv_t, & initializing_actions, & intermediate_timestep_count, & length, & message_string, & nesting_offline, & neutral, & nudging, & passive_scalar, & restart_string, & rans_mode, & rans_tke_e, & tsc USE exchange_horiz_mod, & ONLY: exchange_horiz USE grid_variables, & ONLY: ddx, & ddy, & dx, & dy USE indices, & ONLY: nbgp, & nx, & nxl, & nxlg, & nxr, & nxrg, & ny, & nys, & nysg, & nyn, & nyng, & nzb, & nzt USE kinds USE pegrid USE pmc_interface, & ONLY : nesting_mode ! USE restart_data_mpi_io_mod, & ! ONLY: USE surface_mod, & ONLY : bc_h IMPLICIT NONE LOGICAL :: dynamics_module_enabled = .FALSE. !< SAVE PRIVATE ! !-- Public functions PUBLIC & dynamics_parin, & dynamics_check_parameters, & dynamics_check_data_output_ts, & dynamics_check_data_output_pr, & dynamics_check_data_output, & dynamics_init_masks, & dynamics_define_netcdf_grid, & dynamics_init_arrays, & dynamics_init, & dynamics_init_checks, & dynamics_header, & dynamics_actions, & dynamics_non_advective_processes, & dynamics_exchange_horiz, & dynamics_prognostic_equations, & dynamics_boundary_conditions, & dynamics_swap_timelevel, & dynamics_3d_data_averaging, & dynamics_data_output_2d, & dynamics_data_output_3d, & dynamics_statistics, & dynamics_rrd_global, & dynamics_rrd_local, & dynamics_wrd_global, & dynamics_wrd_local, & dynamics_last_actions ! !-- Public parameters, constants and initial values PUBLIC & dynamics_module_enabled INTERFACE dynamics_parin MODULE PROCEDURE dynamics_parin END INTERFACE dynamics_parin INTERFACE dynamics_check_parameters MODULE PROCEDURE dynamics_check_parameters END INTERFACE dynamics_check_parameters INTERFACE dynamics_check_data_output_ts MODULE PROCEDURE dynamics_check_data_output_ts END INTERFACE dynamics_check_data_output_ts INTERFACE dynamics_check_data_output_pr MODULE PROCEDURE dynamics_check_data_output_pr END INTERFACE dynamics_check_data_output_pr INTERFACE dynamics_check_data_output MODULE PROCEDURE dynamics_check_data_output END INTERFACE dynamics_check_data_output INTERFACE dynamics_init_masks MODULE PROCEDURE dynamics_init_masks END INTERFACE dynamics_init_masks INTERFACE dynamics_define_netcdf_grid MODULE PROCEDURE dynamics_define_netcdf_grid END INTERFACE dynamics_define_netcdf_grid INTERFACE dynamics_init_arrays MODULE PROCEDURE dynamics_init_arrays END INTERFACE dynamics_init_arrays INTERFACE dynamics_init MODULE PROCEDURE dynamics_init END INTERFACE dynamics_init INTERFACE dynamics_init_checks MODULE PROCEDURE dynamics_init_checks END INTERFACE dynamics_init_checks INTERFACE dynamics_header MODULE PROCEDURE dynamics_header END INTERFACE dynamics_header INTERFACE dynamics_actions MODULE PROCEDURE dynamics_actions MODULE PROCEDURE dynamics_actions_ij END INTERFACE dynamics_actions INTERFACE dynamics_non_advective_processes MODULE PROCEDURE dynamics_non_advective_processes MODULE PROCEDURE dynamics_non_advective_processes_ij END INTERFACE dynamics_non_advective_processes INTERFACE dynamics_exchange_horiz MODULE PROCEDURE dynamics_exchange_horiz END INTERFACE dynamics_exchange_horiz INTERFACE dynamics_prognostic_equations MODULE PROCEDURE dynamics_prognostic_equations MODULE PROCEDURE dynamics_prognostic_equations_ij END INTERFACE dynamics_prognostic_equations INTERFACE dynamics_boundary_conditions MODULE PROCEDURE dynamics_boundary_conditions END INTERFACE dynamics_boundary_conditions INTERFACE dynamics_swap_timelevel MODULE PROCEDURE dynamics_swap_timelevel END INTERFACE dynamics_swap_timelevel INTERFACE dynamics_3d_data_averaging MODULE PROCEDURE dynamics_3d_data_averaging END INTERFACE dynamics_3d_data_averaging INTERFACE dynamics_data_output_2d MODULE PROCEDURE dynamics_data_output_2d END INTERFACE dynamics_data_output_2d INTERFACE dynamics_data_output_3d MODULE PROCEDURE dynamics_data_output_3d END INTERFACE dynamics_data_output_3d INTERFACE dynamics_statistics MODULE PROCEDURE dynamics_statistics END INTERFACE dynamics_statistics INTERFACE dynamics_rrd_global MODULE PROCEDURE dynamics_rrd_global_ftn MODULE PROCEDURE dynamics_rrd_global_mpi END INTERFACE dynamics_rrd_global INTERFACE dynamics_rrd_local MODULE PROCEDURE dynamics_rrd_local_ftn MODULE PROCEDURE dynamics_rrd_local_mpi END INTERFACE dynamics_rrd_local INTERFACE dynamics_wrd_global MODULE PROCEDURE dynamics_wrd_global END INTERFACE dynamics_wrd_global INTERFACE dynamics_wrd_local MODULE PROCEDURE dynamics_wrd_local END INTERFACE dynamics_wrd_local INTERFACE dynamics_last_actions MODULE PROCEDURE dynamics_last_actions END INTERFACE dynamics_last_actions CONTAINS !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Read module-specific namelist !--------------------------------------------------------------------------------------------------! SUBROUTINE dynamics_parin CHARACTER(LEN=100) :: line !< dummy string that contains the current line of the parameter !< file INTEGER(iwp) :: io_status !< status after reading the namelist file LOGICAL :: switch_off_module = .FALSE. !< local namelist parameter to switch off the module !< although the respective module namelist appears in !< the namelist file NAMELIST /dynamics_parameters/ switch_off_module ! !-- For the time beeing (unless the dynamics module is further developed), set default module !-- switch to true. dynamics_module_enabled = .TRUE. ! !-- Move to the beginning of the namelist file and try to find and read the namelist. REWIND( 11 ) READ( 11, dynamics_parameters, IOSTAT=io_status ) ! !-- Action depending on the READ status IF ( io_status == 0 ) THEN ! !-- dynamics_parameters namelist was found and read correctly. IF ( .NOT. switch_off_module ) dynamics_module_enabled = .TRUE. ELSEIF ( io_status > 0 ) THEN ! !-- dynamics_parameters namelist was found, but contained errors. Print an error message !-- including the line that caused the problem. BACKSPACE( 11 ) READ( 11 , '(A)') line CALL parin_fail_message( 'dynamics_parameters', line ) ENDIF END SUBROUTINE dynamics_parin !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Check control parameters and deduce further quantities. !--------------------------------------------------------------------------------------------------! SUBROUTINE dynamics_check_parameters END SUBROUTINE dynamics_check_parameters !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Set module-specific timeseries units and labels !--------------------------------------------------------------------------------------------------! SUBROUTINE dynamics_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit ) INTEGER(iwp), INTENT(IN) :: dots_max CHARACTER (LEN=*), DIMENSION(dots_max), INTENT(INOUT) :: dots_label CHARACTER (LEN=*), DIMENSION(dots_max), INTENT(INOUT) :: dots_unit INTEGER(iwp), INTENT(INOUT) :: dots_num ! !-- Next line is to avoid compiler warning about unused variables. Please remove. IF ( dots_num == 0 .OR. dots_label(1)(1:1) == ' ' .OR. dots_unit(1)(1:1) == ' ' ) CONTINUE END SUBROUTINE dynamics_check_data_output_ts !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Set the unit of module-specific profile output quantities. For those variables not recognized, !> the parameter unit is set to "illegal", which tells the calling routine that the output variable !> is not defined and leads to a program abort. !--------------------------------------------------------------------------------------------------! SUBROUTINE dynamics_check_data_output_pr( variable, var_count, unit, dopr_unit ) CHARACTER (LEN=*) :: dopr_unit !< local value of dopr_unit CHARACTER (LEN=*) :: unit !< CHARACTER (LEN=*) :: variable !< INTEGER(iwp) :: var_count !< ! !-- Next line is to avoid compiler warning about unused variables. Please remove. IF ( unit(1:1) == ' ' .OR. dopr_unit(1:1) == ' ' .OR. var_count == 0 ) CONTINUE SELECT CASE ( TRIM( variable ) ) ! CASE ( 'var_name' ) CASE DEFAULT unit = 'illegal' END SELECT END SUBROUTINE dynamics_check_data_output_pr !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Set the unit of module-specific output quantities. For those variables not recognized, !> the parameter unit is set to "illegal", which tells the calling routine that the output variable !< is not defined and leads to a program abort. !--------------------------------------------------------------------------------------------------! SUBROUTINE dynamics_check_data_output( variable, unit ) CHARACTER (LEN=*) :: unit !< CHARACTER (LEN=*) :: variable !< SELECT CASE ( TRIM( variable ) ) ! CASE ( 'u2' ) CASE DEFAULT unit = 'illegal' END SELECT END SUBROUTINE dynamics_check_data_output !--------------------------------------------------------------------------------------------------! ! ! Description: ! ------------ !> Initialize module-specific masked output !--------------------------------------------------------------------------------------------------! SUBROUTINE dynamics_init_masks( variable, unit ) CHARACTER (LEN=*) :: unit !< CHARACTER (LEN=*) :: variable !< SELECT CASE ( TRIM( variable ) ) ! CASE ( 'u2' ) CASE DEFAULT unit = 'illegal' END SELECT END SUBROUTINE dynamics_init_masks !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Initialize module-specific arrays !--------------------------------------------------------------------------------------------------! SUBROUTINE dynamics_init_arrays END SUBROUTINE dynamics_init_arrays !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Execution of module-specific initializing actions !--------------------------------------------------------------------------------------------------! SUBROUTINE dynamics_init END SUBROUTINE dynamics_init !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Perform module-specific post-initialization checks !--------------------------------------------------------------------------------------------------! SUBROUTINE dynamics_init_checks INTEGER(iwp) :: i !< loop index in x-direction INTEGER(iwp) :: j !< loop index in y-direction INTEGER(iwp) :: k !< loop index in z-direction LOGICAL :: realistic_q = .TRUE. !< flag indicating realistic mixing ratios REAL(wp) :: e_s !< saturation water vapor pressure REAL(wp) :: q_s !< saturation mixing ratio REAL(wp) :: t_l !< actual temperature REAL(wp) :: rh_check = 9999999.9_wp !< relative humidity REAL(wp) :: rh_min = 9999999.9_wp !< max relative humidity REAL(wp) :: height = 9999999.9_wp !< height of supersaturated regions REAL(wp) :: min_height = 9999999.9_wp !< height of supersaturated regions ! !-- Check for realistic initial mixing ratio. This must be in a realistic phyiscial range and must !-- not exceed the saturation mixing ratio by more than 2 percent. Please note, the check is !-- performed for each grid point (not just for a vertical profile), in order to cover also !-- three-dimensional initialization. Note, this check gives an error only for the initial run not !-- for a restart run. In case there are no cloud physics considered, the mixing ratio can exceed !-- the saturation moisture. This case a warning is given. IF ( humidity .AND. .NOT. neutral .AND. check_realistic_q ) THEN DO i = nxl, nxr DO j = nys, nyn DO k = nzb+1, nzt ! !-- Calculate actual temperature, water vapor saturation pressure, and based on this !-- the saturation mixing ratio. t_l = exner(k) * pt(k,j,i) e_s = magnus( t_l ) q_s = rd_d_rv * e_s / ( hyp(k) - e_s ) IF ( q(k,j,i) > 1.02_wp * q_s ) THEN realistic_q = .FALSE. rh_check = q(k,j,i) / q_s * 100.0_wp height = zu(k) ENDIF ENDDO ENDDO ENDDO ! !-- Since the check is performed locally, merge the logical flag from all mpi ranks, !-- in order to do not print the error message multiple times. #if defined( __parallel ) CALL MPI_ALLREDUCE( MPI_IN_PLACE, realistic_q, 1, MPI_LOGICAL, MPI_LAND, comm2d, ierr) CALL MPI_ALLREDUCE( rh_check, rh_min, 1, MPI_REAL, MPI_MIN, comm2d, ierr ) CALL MPI_ALLREDUCE( height, min_height, 1, MPI_REAL, MPI_MIN, comm2d, ierr ) #endif IF ( .NOT. realistic_q .AND. & TRIM( initializing_actions ) /= 'read_restart_data' ) THEN WRITE( message_string, * ) 'The initial mixing ratio exceeds the saturation mixing' // & 'ratio, with rh =', rh_min, '% in a height of', min_height, 'm for the first time' CALL message( 'dynamic_init_checks', 'PA0697', 2, 2, 0, 6, 0 ) ELSEIF ( .NOT. realistic_q .AND. & TRIM( initializing_actions ) == 'read_restart_data' ) THEN WRITE( message_string, * ) 'The initial mixing ratio exceeds the saturation mixing' // & 'ratio, with rh =', rh_min, '% in a height of', min_height, 'm for the first time' CALL message( 'dynamic_init_checks', 'PA0697', 0, 1, 0, 6, 0 ) ENDIF ENDIF END SUBROUTINE dynamics_init_checks !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Set the grids on which module-specific output quantities are defined. Allowed values for !> grid_x are "x" and "xu", for grid_y "y" and "yv", and for grid_z "zu" and "zw". !--------------------------------------------------------------------------------------------------! SUBROUTINE dynamics_define_netcdf_grid( variable, found, grid_x, grid_y, grid_z ) CHARACTER (LEN=*) :: grid_x !< CHARACTER (LEN=*) :: grid_y !< CHARACTER (LEN=*) :: grid_z !< CHARACTER (LEN=*) :: variable !< LOGICAL :: found !< SELECT CASE ( TRIM( variable ) ) ! CASE ( 'u2' ) CASE DEFAULT found = .FALSE. grid_x = 'none' grid_y = 'none' grid_z = 'none' END SELECT END SUBROUTINE dynamics_define_netcdf_grid !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Print a header with module-specific information. !--------------------------------------------------------------------------------------------------! SUBROUTINE dynamics_header( io ) INTEGER(iwp) :: io !< output-file id ! !-- Write dynamics module header !-- NOTE: Deactivated because no relevant information to write so far IF ( .FALSE. ) WRITE ( io, 100 ) ! !-- Format-descriptors 100 FORMAT (//' Dynamics module information:'/ & ' -----------------------------------'//) END SUBROUTINE dynamics_header !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Execute module-specific actions for all grid points !--------------------------------------------------------------------------------------------------! SUBROUTINE dynamics_actions( location ) CHARACTER (LEN=*) :: location !< ! INTEGER(iwp) :: i !< ! INTEGER(iwp) :: j !< ! INTEGER(iwp) :: k !< ! !-- Here the user-defined actions follow !-- No calls for single grid points are allowed at locations before and after the timestep, since !-- these calls are not within an i,j-loop SELECT CASE ( location ) CASE ( 'before_timestep' ) CASE ( 'before_prognostic_equations' ) CASE ( 'after_integration' ) CASE ( 'after_timestep' ) CASE ( 'u-tendency' ) CASE ( 'v-tendency' ) CASE ( 'w-tendency' ) CASE ( 'pt-tendency' ) CASE ( 'sa-tendency' ) CASE ( 'e-tendency' ) CASE ( 'q-tendency' ) CASE ( 's-tendency' ) CASE DEFAULT CONTINUE END SELECT END SUBROUTINE dynamics_actions !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Execute module-specific actions for grid point i,j !--------------------------------------------------------------------------------------------------! SUBROUTINE dynamics_actions_ij( i, j, location ) CHARACTER (LEN=*) :: location INTEGER(iwp) :: i INTEGER(iwp) :: j ! !-- Here the user-defined actions follow SELECT CASE ( location ) CASE ( 'u-tendency' ) ! !-- Next line is to avoid compiler warning about unused variables. Please remove. IF ( i + j < 0 ) CONTINUE CASE ( 'v-tendency' ) CASE ( 'w-tendency' ) CASE ( 'pt-tendency' ) CASE ( 'sa-tendency' ) CASE ( 'e-tendency' ) CASE ( 'q-tendency' ) CASE ( 's-tendency' ) CASE DEFAULT CONTINUE END SELECT END SUBROUTINE dynamics_actions_ij !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Compute module-specific non-advective processes for all grid points !--------------------------------------------------------------------------------------------------! SUBROUTINE dynamics_non_advective_processes END SUBROUTINE dynamics_non_advective_processes !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Compute module-specific non-advective processes for grid points i,j !--------------------------------------------------------------------------------------------------! SUBROUTINE dynamics_non_advective_processes_ij( i, j ) INTEGER(iwp) :: i !< INTEGER(iwp) :: j !< ! !-- Next line is just to avoid compiler warnings about unused variables. You may remove it. IF ( i + j < 0 ) CONTINUE END SUBROUTINE dynamics_non_advective_processes_ij !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Perform module-specific horizontal boundary exchange !--------------------------------------------------------------------------------------------------! SUBROUTINE dynamics_exchange_horiz( location ) CHARACTER (LEN=*), INTENT(IN) :: location !< call location string SELECT CASE ( location ) CASE ( 'before_prognostic_equation' ) CASE ( 'after_prognostic_equation' ) CALL exchange_horiz( u_p, nbgp ) CALL exchange_horiz( v_p, nbgp ) CALL exchange_horiz( w_p, nbgp ) CALL exchange_horiz( pt_p, nbgp ) IF ( .NOT. constant_diffusion ) CALL exchange_horiz( e_p, nbgp ) IF ( rans_tke_e ) CALL exchange_horiz( diss_p, nbgp ) IF ( humidity ) CALL exchange_horiz( q_p, nbgp ) IF ( passive_scalar ) CALL exchange_horiz( s_p, nbgp ) CASE ( 'after_anterpolation' ) CALL exchange_horiz( u, nbgp ) CALL exchange_horiz( v, nbgp ) CALL exchange_horiz( w, nbgp ) IF ( .NOT. neutral ) CALL exchange_horiz( pt, nbgp ) IF ( humidity ) CALL exchange_horiz( q, nbgp ) IF ( passive_scalar ) CALL exchange_horiz( s, nbgp ) IF ( .NOT. constant_diffusion ) CALL exchange_horiz( e, nbgp ) IF ( .NOT. constant_diffusion .AND. rans_mode .AND. rans_tke_e ) THEN CALL exchange_horiz( diss, nbgp ) ENDIF END SELECT END SUBROUTINE dynamics_exchange_horiz !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Compute module-specific prognostic equations for all grid points !--------------------------------------------------------------------------------------------------! SUBROUTINE dynamics_prognostic_equations END SUBROUTINE dynamics_prognostic_equations !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Compute module-specific prognostic equations for grid point i,j !--------------------------------------------------------------------------------------------------! SUBROUTINE dynamics_prognostic_equations_ij( i, j, i_omp_start, tn ) INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction INTEGER(iwp), INTENT(IN) :: i_omp_start !< first loop index of i-loop in prognostic_equations INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction INTEGER(iwp), INTENT(IN) :: tn !< task number of openmp task ! !-- Next line is just to avoid compiler warnings about unused variables. You may remove it. IF ( i + j + i_omp_start + tn < 0 ) CONTINUE END SUBROUTINE dynamics_prognostic_equations_ij !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Compute boundary conditions of dynamics model !--------------------------------------------------------------------------------------------------! SUBROUTINE dynamics_boundary_conditions IMPLICIT NONE INTEGER(iwp) :: i !< grid index x direction INTEGER(iwp) :: j !< grid index y direction INTEGER(iwp) :: k !< grid index z direction INTEGER(iwp) :: l !< running index boundary type, for up- and downward-facing walls INTEGER(iwp) :: m !< running index surface elements ! !-- Bottom boundary IF ( ibc_uv_b == 1 ) THEN u_p(nzb,:,:) = u_p(nzb+1,:,:) v_p(nzb,:,:) = v_p(nzb+1,:,:) ENDIF ! !-- Set zero vertical velocity at topography top (l=0), or bottom (l=1) in case !-- of downward-facing surfaces. DO l = 0, 1 !$OMP PARALLEL DO PRIVATE( i, j, k ) !$ACC PARALLEL LOOP PRIVATE(i, j, k) & !$ACC PRESENT(bc_h, w_p) DO m = 1, bc_h(l)%ns i = bc_h(l)%i(m) j = bc_h(l)%j(m) k = bc_h(l)%k(m) w_p(k+bc_h(l)%koff,j,i) = 0.0_wp ENDDO ENDDO ! !-- Top boundary. A nested domain ( ibc_uv_t = 3 ) does not require settings. IF ( ibc_uv_t == 0 ) THEN !$ACC KERNELS PRESENT(u_p, v_p, u_init, v_init) u_p(nzt+1,:,:) = u_init(nzt+1) v_p(nzt+1,:,:) = v_init(nzt+1) !$ACC END KERNELS ELSEIF ( ibc_uv_t == 1 ) THEN u_p(nzt+1,:,:) = u_p(nzt,:,:) v_p(nzt+1,:,:) = v_p(nzt,:,:) ENDIF ! !-- Vertical nesting: Vertical velocity not zero at the top of the fine grid IF ( .NOT. child_domain .AND. .NOT. nesting_offline .AND. & TRIM(coupling_mode) /= 'vnested_fine' ) THEN !$ACC KERNELS PRESENT(w_p) w_p(nzt:nzt+1,:,:) = 0.0_wp !< nzt is not a prognostic level (but cf. pres) !$ACC END KERNELS ENDIF ! !-- Temperature at bottom and top boundary. !-- In case of coupled runs (ibc_pt_b = 2) the temperature is given by the sea surface temperature !-- of the coupled ocean model. !-- Dirichlet IF ( .NOT. neutral ) THEN IF ( ibc_pt_b == 0 ) THEN DO l = 0, 1 !$OMP PARALLEL DO PRIVATE( i, j, k ) DO m = 1, bc_h(l)%ns i = bc_h(l)%i(m) j = bc_h(l)%j(m) k = bc_h(l)%k(m) pt_p(k+bc_h(l)%koff,j,i) = pt(k+bc_h(l)%koff,j,i) ENDDO ENDDO ! !-- Neumann, zero-gradient ELSEIF ( ibc_pt_b == 1 ) THEN DO l = 0, 1 !$OMP PARALLEL DO PRIVATE( i, j, k ) !$ACC PARALLEL LOOP PRIVATE(i, j, k) & !$ACC PRESENT(bc_h, pt_p) DO m = 1, bc_h(l)%ns i = bc_h(l)%i(m) j = bc_h(l)%j(m) k = bc_h(l)%k(m) pt_p(k+bc_h(l)%koff,j,i) = pt_p(k,j,i) ENDDO ENDDO ENDIF ! !-- Temperature at top boundary IF ( ibc_pt_t == 0 ) THEN pt_p(nzt+1,:,:) = pt(nzt+1,:,:) ! !-- In case of nudging adjust top boundary to pt which is !-- read in from NUDGING-DATA IF ( nudging ) THEN pt_p(nzt+1,:,:) = pt_init(nzt+1) ENDIF ELSEIF ( ibc_pt_t == 1 ) THEN pt_p(nzt+1,:,:) = pt_p(nzt,:,:) ELSEIF ( ibc_pt_t == 2 ) THEN !$ACC KERNELS PRESENT(pt_p, dzu) pt_p(nzt+1,:,:) = pt_p(nzt,:,:) + bc_pt_t_val * dzu(nzt+1) !$ACC END KERNELS ENDIF ENDIF ! !-- Boundary conditions for total water content, bottom and top boundary (see also temperature) IF ( humidity ) THEN ! !-- Surface conditions for constant_humidity_flux !-- Run loop over all non-natural and natural walls. Note, in wall-datatype the k coordinate !-- belongs to the atmospheric grid point, therefore, set q_p at k-1 IF ( ibc_q_b == 0 ) THEN DO l = 0, 1 !$OMP PARALLEL DO PRIVATE( i, j, k ) DO m = 1, bc_h(l)%ns i = bc_h(l)%i(m) j = bc_h(l)%j(m) k = bc_h(l)%k(m) q_p(k+bc_h(l)%koff,j,i) = q(k+bc_h(l)%koff,j,i) ENDDO ENDDO ELSE DO l = 0, 1 !$OMP PARALLEL DO PRIVATE( i, j, k ) DO m = 1, bc_h(l)%ns i = bc_h(l)%i(m) j = bc_h(l)%j(m) k = bc_h(l)%k(m) q_p(k+bc_h(l)%koff,j,i) = q_p(k,j,i) ENDDO ENDDO ENDIF ! !-- Top boundary IF ( ibc_q_t == 0 ) THEN q_p(nzt+1,:,:) = q(nzt+1,:,:) ELSEIF ( ibc_q_t == 1 ) THEN q_p(nzt+1,:,:) = q_p(nzt,:,:) + bc_q_t_val * dzu(nzt+1) ENDIF ENDIF ! !-- Boundary conditions for scalar, bottom and top boundary (see also temperature) IF ( passive_scalar ) THEN ! !-- Surface conditions for constant_humidity_flux !-- Run loop over all non-natural and natural walls. Note, in wall-datatype the k coordinate !-- belongs to the atmospheric grid point, therefore, set s_p at k-1 IF ( ibc_s_b == 0 ) THEN DO l = 0, 1 !$OMP PARALLEL DO PRIVATE( i, j, k ) DO m = 1, bc_h(l)%ns i = bc_h(l)%i(m) j = bc_h(l)%j(m) k = bc_h(l)%k(m) s_p(k+bc_h(l)%koff,j,i) = s(k+bc_h(l)%koff,j,i) ENDDO ENDDO ELSE DO l = 0, 1 !$OMP PARALLEL DO PRIVATE( i, j, k ) DO m = 1, bc_h(l)%ns i = bc_h(l)%i(m) j = bc_h(l)%j(m) k = bc_h(l)%k(m) s_p(k+bc_h(l)%koff,j,i) = s_p(k,j,i) ENDDO ENDDO ENDIF ! !-- Top boundary condition IF ( ibc_s_t == 0 ) THEN s_p(nzt+1,:,:) = s(nzt+1,:,:) ELSEIF ( ibc_s_t == 1 ) THEN s_p(nzt+1,:,:) = s_p(nzt,:,:) ELSEIF ( ibc_s_t == 2 ) THEN s_p(nzt+1,:,:) = s_p(nzt,:,:) + bc_s_t_val * dzu(nzt+1) ENDIF ENDIF ! !-- In case of inflow or nest boundary at the south boundary the boundary for v is at nys and in !-- case of inflow or nest boundary at the left boundary the boundary for u is at nxl. Since in !-- prognostic_equations (cache optimized version) these levels are handled as a prognostic level, !-- boundary values have to be restored here. IF ( bc_dirichlet_s ) THEN v_p(:,nys,:) = v_p(:,nys-1,:) ELSEIF ( bc_dirichlet_l ) THEN u_p(:,:,nxl) = u_p(:,:,nxl-1) ENDIF ! !-- The same restoration for u at i=nxl and v at j=nys as above must be made in case of nest !-- boundaries. This must not be done in case of vertical nesting mode as in that case the lateral !-- boundaries are actually cyclic. !-- Lateral oundary conditions for TKE and dissipation are set in tcm_boundary_conds. IF ( nesting_mode /= 'vertical' .OR. nesting_offline ) THEN IF ( bc_dirichlet_s ) THEN v_p(:,nys,:) = v_p(:,nys-1,:) ENDIF IF ( bc_dirichlet_l ) THEN u_p(:,:,nxl) = u_p(:,:,nxl-1) ENDIF ENDIF ! !-- Lateral boundary conditions for scalar quantities at the outflow. !-- Lateral oundary conditions for TKE and dissipation are set in tcm_boundary_conds. IF ( bc_radiation_s ) THEN pt_p(:,nys-1,:) = pt_p(:,nys,:) IF ( humidity ) THEN q_p(:,nys-1,:) = q_p(:,nys,:) ENDIF IF ( passive_scalar ) s_p(:,nys-1,:) = s_p(:,nys,:) ELSEIF ( bc_radiation_n ) THEN pt_p(:,nyn+1,:) = pt_p(:,nyn,:) IF ( humidity ) THEN q_p(:,nyn+1,:) = q_p(:,nyn,:) ENDIF IF ( passive_scalar ) s_p(:,nyn+1,:) = s_p(:,nyn,:) ELSEIF ( bc_radiation_l ) THEN pt_p(:,:,nxl-1) = pt_p(:,:,nxl) IF ( humidity ) THEN q_p(:,:,nxl-1) = q_p(:,:,nxl) ENDIF IF ( passive_scalar ) s_p(:,:,nxl-1) = s_p(:,:,nxl) ELSEIF ( bc_radiation_r ) THEN pt_p(:,:,nxr+1) = pt_p(:,:,nxr) IF ( humidity ) THEN q_p(:,:,nxr+1) = q_p(:,:,nxr) ENDIF IF ( passive_scalar ) s_p(:,:,nxr+1) = s_p(:,:,nxr) ENDIF ! !-- Radiation boundary conditions for the velocities at the respective outflow. !-- The phase velocity is set to the maximum phase velocity that ensures numerical !-- stability (CFL-condition), i.e. a Courant number of one is assumed. IF ( bc_radiation_s ) THEN u_p(:,-1,:) = u(:,0,:) v_p(:,0,:) = v(:,1,:) w_p(:,-1,:) = w(:,0,:) ENDIF IF ( bc_radiation_n ) THEN u_p(:,ny+1,:) = u(:,ny,:) v_p(:,ny+1,:) = v(:,ny,:) w_p(:,ny+1,:) = w(:,ny,:) ENDIF IF ( bc_radiation_l ) THEN u_p(:,:,0) = u(:,:,1) v_p(:,:,-1) = v(:,:,0) w_p(:,:,-1) = w(:,:,0) ENDIF IF ( bc_radiation_r ) THEN u_p(:,:,nx+1) = u(:,:,nx) v_p(:,:,nx+1) = v(:,:,nx) w_p(:,:,nx+1) = w(:,:,nx) ENDIF END SUBROUTINE dynamics_boundary_conditions !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Swap timelevels of module-specific array pointers !--------------------------------------------------------------------------------------------------! SUBROUTINE dynamics_swap_timelevel ( mod_count ) INTEGER, INTENT(IN) :: mod_count SELECT CASE ( mod_count ) CASE ( 0 ) u => u_1; u_p => u_2 v => v_1; v_p => v_2 w => w_1; w_p => w_2 IF ( .NOT. neutral ) THEN pt => pt_1; pt_p => pt_2 ENDIF IF ( humidity ) THEN q => q_1; q_p => q_2 ENDIF IF ( passive_scalar ) THEN s => s_1; s_p => s_2 ENDIF CASE ( 1 ) u => u_2; u_p => u_1 v => v_2; v_p => v_1 w => w_2; w_p => w_1 IF ( .NOT. neutral ) THEN pt => pt_2; pt_p => pt_1 ENDIF IF ( humidity ) THEN q => q_2; q_p => q_1 ENDIF IF ( passive_scalar ) THEN s => s_2; s_p => s_1 ENDIF END SELECT END SUBROUTINE dynamics_swap_timelevel !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Sum up and time-average module-specific output quantities as well as allocate the array necessary !> for storing the average. !--------------------------------------------------------------------------------------------------! SUBROUTINE dynamics_3d_data_averaging( mode, variable ) CHARACTER (LEN=*) :: mode !< CHARACTER (LEN=*) :: variable !< IF ( mode == 'allocate' ) THEN SELECT CASE ( TRIM( variable ) ) ! CASE ( 'u2' ) CASE DEFAULT CONTINUE END SELECT ELSEIF ( mode == 'sum' ) THEN SELECT CASE ( TRIM( variable ) ) ! CASE ( 'u2' ) CASE DEFAULT CONTINUE END SELECT ELSEIF ( mode == 'average' ) THEN SELECT CASE ( TRIM( variable ) ) ! CASE ( 'u2' ) END SELECT ENDIF END SUBROUTINE dynamics_3d_data_averaging !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Resorts the module-specific output quantity with indices (k,j,i) to a temporary array with !> indices (i,j,k) and sets the grid on which it is defined. !> Allowed values for grid are "zu" and "zw". !--------------------------------------------------------------------------------------------------! SUBROUTINE dynamics_data_output_2d( av, variable, found, grid, mode, local_pf, two_d, nzb_do, & nzt_do, fill_value ) CHARACTER (LEN=*) :: grid !< CHARACTER (LEN=*), INTENT(IN) :: mode !< either 'xy', 'xz' or 'yz' CHARACTER (LEN=*) :: variable !< INTEGER(iwp) :: av !< flag to control data output of instantaneous or time-averaged data ! INTEGER(iwp) :: i !< grid index along x-direction ! INTEGER(iwp) :: j !< grid index along y-direction ! INTEGER(iwp) :: k !< grid index along z-direction ! INTEGER(iwp) :: m !< running index surface elements INTEGER(iwp) :: nzb_do !< lower limit of the domain (usually nzb) INTEGER(iwp) :: nzt_do !< upper limit of the domain (usually nzt+1) LOGICAL :: found !< LOGICAL :: two_d !< flag parameter that indicates 2D variables (horizontal cross sections) REAL(wp), INTENT(IN) :: fill_value REAL(wp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do) :: local_pf !< ! !-- Next line is just to avoid compiler warnings about unused variables. You may remove it. IF ( two_d .AND. av + LEN( mode ) + local_pf(nxl,nys,nzb_do) + fill_value < 0.0 ) CONTINUE found = .TRUE. SELECT CASE ( TRIM( variable ) ) ! CASE ( 'u2_xy', 'u2_xz', 'u2_yz' ) CASE DEFAULT found = .FALSE. grid = 'none' END SELECT END SUBROUTINE dynamics_data_output_2d !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Resorts the module-specific output quantity with indices (k,j,i) to a temporary array with !> indices (i,j,k). !--------------------------------------------------------------------------------------------------! SUBROUTINE dynamics_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do ) CHARACTER (LEN=*) :: variable !< INTEGER(iwp) :: av !< ! INTEGER(iwp) :: i !< ! INTEGER(iwp) :: j !< ! INTEGER(iwp) :: k !< INTEGER(iwp) :: nzb_do !< lower limit of the data output (usually 0) INTEGER(iwp) :: nzt_do !< vertical upper limit of the data output (usually nz_do3d) LOGICAL :: found !< REAL(wp), INTENT(IN) :: fill_value !< value for the _FillValue attribute REAL(wp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do) :: local_pf !< ! !-- Next line is to avoid compiler warning about unused variables. Please remove. IF ( av + local_pf(nxl,nys,nzb_do) + fill_value < 0.0 ) CONTINUE found = .TRUE. SELECT CASE ( TRIM( variable ) ) ! CASE ( 'u2' ) CASE DEFAULT found = .FALSE. END SELECT END SUBROUTINE dynamics_data_output_3d !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Calculation of module-specific statistics, i.e. horizontally averaged profiles and time series. !> This is called for every statistic region sr, but at least for the region "total domain" (sr=0). !--------------------------------------------------------------------------------------------------! SUBROUTINE dynamics_statistics( mode, sr, tn ) CHARACTER (LEN=*) :: mode !< ! INTEGER(iwp) :: i !< ! INTEGER(iwp) :: j !< ! INTEGER(iwp) :: k !< INTEGER(iwp) :: sr !< INTEGER(iwp) :: tn !< ! !-- Next line is to avoid compiler warning about unused variables. Please remove. IF ( sr == 0 .OR. tn == 0 ) CONTINUE IF ( mode == 'profiles' ) THEN ELSEIF ( mode == 'time_series' ) THEN ENDIF END SUBROUTINE dynamics_statistics !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Read module-specific global restart data (Fortran binary format). !--------------------------------------------------------------------------------------------------! SUBROUTINE dynamics_rrd_global_ftn( found ) LOGICAL, INTENT(OUT) :: found found = .TRUE. SELECT CASE ( restart_string(1:length) ) CASE ( 'global_paramter' ) ! READ ( 13 ) global_parameter CASE DEFAULT found = .FALSE. END SELECT END SUBROUTINE dynamics_rrd_global_ftn !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Read module-specific global restart data (MPI-IO). !--------------------------------------------------------------------------------------------------! SUBROUTINE dynamics_rrd_global_mpi ! CALL rrd_mpi_io( 'global_parameter', global_parameter ) CONTINUE END SUBROUTINE dynamics_rrd_global_mpi !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Read module-specific local restart data arrays (Fortran binary format). !> Subdomain index limits on file are given by nxl_on_file, etc. !> Indices nxlc, etc. indicate the range of gridpoints to be mapped from the subdomain on file (f) !> to the subdomain of the current PE (c). They have been calculated in routine rrd_local. !--------------------------------------------------------------------------------------------------! SUBROUTINE dynamics_rrd_local_ftn( k, nxlf, nxlc, nxl_on_file, nxrf, nxrc, nxr_on_file, nynf, & nync, nyn_on_file, nysf, nysc, nys_on_file, tmp_2d, tmp_3d, & found ) INTEGER(iwp) :: k !< INTEGER(iwp) :: nxlc !< INTEGER(iwp) :: nxlf !< INTEGER(iwp) :: nxl_on_file !< INTEGER(iwp) :: nxrc !< INTEGER(iwp) :: nxrf !< INTEGER(iwp) :: nxr_on_file !< INTEGER(iwp) :: nync !< INTEGER(iwp) :: nynf !< INTEGER(iwp) :: nyn_on_file !< INTEGER(iwp) :: nysc !< INTEGER(iwp) :: nysf !< INTEGER(iwp) :: nys_on_file !< LOGICAL, INTENT(OUT) :: found REAL(wp), DIMENSION(nys_on_file-nbgp:nyn_on_file+nbgp,nxl_on_file-nbgp:nxr_on_file+nbgp) :: tmp_2d !< REAL(wp), DIMENSION(nzb:nzt+1,nys_on_file-nbgp:nyn_on_file+nbgp,nxl_on_file-nbgp:nxr_on_file+nbgp) :: tmp_3d !< ! !-- Next line is to avoid compiler warning about unused variables. Please remove. IF ( k + nxlc + nxlf + nxrc + nxrf + nync + nynf + nysc + nysf + & tmp_2d(nys_on_file,nxl_on_file) + & tmp_3d(nzb,nys_on_file,nxl_on_file) < 0.0 ) CONTINUE ! !-- Here the reading of user-defined restart data follows: !-- Sample for user-defined output found = .TRUE. SELECT CASE ( restart_string(1:length) ) ! CASE ( 'u2_av' ) CASE DEFAULT found = .FALSE. END SELECT END SUBROUTINE dynamics_rrd_local_ftn !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Read module-specific local restart data arrays (MPI-IO). !--------------------------------------------------------------------------------------------------! SUBROUTINE dynamics_rrd_local_mpi IMPLICIT NONE ! LOGICAL :: array_found !< ! CALL rd_mpi_io_check_array( 'u2_av' , found = array_found ) ! IF ( array_found ) THEN ! IF ( .NOT. ALLOCATED( u2_av ) ) ALLOCATE( u2_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) ) ! CALL rrd_mpi_io( 'u2_av', u2_av ) ! ENDIF CONTINUE END SUBROUTINE dynamics_rrd_local_mpi !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Writes global module-specific restart data into binary file(s) for restart runs. !--------------------------------------------------------------------------------------------------! SUBROUTINE dynamics_wrd_global END SUBROUTINE dynamics_wrd_global !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Writes processor specific and module-specific restart data into binary file(s) for restart runs. !--------------------------------------------------------------------------------------------------! SUBROUTINE dynamics_wrd_local END SUBROUTINE dynamics_wrd_local !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Execute module-specific actions at the very end of the program. !--------------------------------------------------------------------------------------------------! SUBROUTINE dynamics_last_actions END SUBROUTINE dynamics_last_actions END MODULE dynamics_mod